MagnusThome / Capacitive-RainmeterLinks
Measure rain intensity in Homeassistant with a capacitive sensor
☆19Updated 2 years ago
Alternatives and similar repositories for Capacitive-Rainmeter
Users that are interested in Capacitive-Rainmeter are comparing it to the libraries listed below
Sorting:
- Enhancing Nice-Power Bench Power Supplies with ESP8266 Connectivity☆68Updated last year
- ☆18Updated 2 years ago
- Multi Channel Configurable PID regulator on M5Stack Core☆50Updated last year
- DYI ATX PSU☆36Updated 3 years ago
- Minimalist 4-channel 0 to 27V meter using AVR microcontroller and 72x40 OLED display☆20Updated last year
- Clock with four 8x8 Led-Matrix, both for ESP8266 and ESP32☆28Updated last year
- Extend the possibilities of cheap digital power supplies with a WiFi module☆59Updated last year
- ☆29Updated 2 years ago
- Reflow Oven from the KMart mini oven☆12Updated 10 months ago
- Sailor Hat for Raspberry Pi hardware design files☆53Updated last year
- A small simple to use internet radio based around the ESP32☆55Updated 2 years ago
- Simple design for 16x2 OLED Character Display using the US2066 chip☆13Updated 2 years ago
- CH340C based ESP32 programmer module pcb with auto- programming & reset, sponsored by PCBWay.☆40Updated 11 months ago
- Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based☆50Updated 2 years ago
- ☆42Updated 3 years ago
- A microcontroller board that can accommodate a range of different colour TFT displays.☆18Updated 3 years ago
- ☆43Updated 4 years ago
- A clock with 241 RGB LEDs☆19Updated 2 years ago
- Universal step-down module☆26Updated 5 years ago
- Design files for the BAPPR LED buck converter☆43Updated last year
- Li-Ion battery charger, based on BQ24060 IC☆45Updated 2 years ago
- ☆44Updated 2 years ago
- kitchen timer☆16Updated 2 years ago
- The HexaClock is a hexagon-shaped LED matrix with each pixel also in the shape of a hexagon! There are 127 individual RGB pixels ready to…☆27Updated last year
- 12-Button IR Remote Control☆45Updated 3 years ago
- Program for connecting to and retrieving data from a Parkside PDM-300-C2 or PDM-300-C3 digital multimeter.☆44Updated 2 years ago
- Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython☆34Updated 2 years ago
- Library for Arduino and ATmega series processors to read the processor's Vcc voltage and percentage of capacity (for battery based projec…☆79Updated 11 months ago
- 3D Printed Wall-Mounted NeoPixel LED Clock with NTP Synchronization☆55Updated last year
- A generic breakout board for TSSOP20 chips to a SIP header meant for breadboard use☆15Updated last year