Alternatives and similar repositories for PythonCarDisplay

Users that are interested in PythonCarDisplay are comparing it to the libraries listed below

• matthewfortier / Digital-Dashboard
  Digital OBDII Instrument Cluster developed in Angular / Express available for all vehicles that have OBDII capabilities
  ☆25Updated 5 years ago
• kmalinich / node-bmw-ref
  BMW CANBUS/DBUS/IBUS/KBUS information/reference/examples
  ☆58Updated 6 years ago
• dorsic / RPi-OBD
  ODBII & GPS logger using Raspberry Pi and bluetooth
  ☆19Updated 8 years ago
• educampos28 / OBD2_HACK
  Use ELM327 bluetooth device to evaluate all packages sent through CAN on OBD2 interface.
  ☆50Updated 7 years ago
• gasparian / obd_elm327_vehicle_speed
  C script for talking to OBD-II port via elm327 controller on Linux
  ☆16Updated 5 years ago
• murrasource / digital_dash
  A digital dashboard using Python, Raspberry Pi Zero W, and vehicle's On Board Diagnostics (OBD-II) Port.
  ☆28Updated 4 years ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆78Updated last year
• kostaszaf / can-gateway-sniffer
  An embedded CAN bus sniffer which is able to monitor any of the vehicle internal CAN bus and perform some action by triggering new CAN me…
  ☆66Updated 3 years ago
• shchers / ecu-simulator
  OBD-II ECU Simulator
  ☆64Updated 4 years ago
• PowerBroker2 / ArduHUD
  Arduino/ELM327-based project to create a car head's up display
  ☆47Updated 3 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆19Updated last year
• joshellissh / PiDGC
  Raspberry Pi / Teensy based Digital Gauge Cluster
  ☆69Updated 2 years ago
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆140Updated 2 weeks ago
• thomastech / CAN2Cluster
  CAN-Bus Emulator for Controlling Automotive Dashboard Instrument Clusters
  ☆40Updated last year
• Mathews2115 / AutoDashBackEnd
  Digital Dash 'backend' for Holley/Racepak CAN protocol
  ☆52Updated 11 months ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆38Updated last year
• beyerch / J2534DotNet
  A .Net interface for J2534 vehicle communications.
  ☆20Updated 13 years ago
• keepiru / dash-kitten
  Arduino-powered digital dashboards... For kittens!
  ☆13Updated 8 years ago
• michaeldove / vagtuner
  Volkswagen Audi Group CANBus diagnostic and ECU firmware flashing
  ☆36Updated 8 years ago
• gooflophaze / MSCan_Gauge
  Megasquirt Gauge based on Arduino Mega, MCP2515 Transceiver, OLED Screen and Neopixel LED Ring.
  ☆16Updated 2 years ago
• nberlette / bmw-dbc
  BMW E90 & E39 CAN definitions
  ☆34Updated 3 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆53Updated 3 years ago
• joukoy / gm-checksum-plugins
  Tunerpro checksum plugins for GM PCM files
  ☆42Updated 8 months ago
• brian03079 / piObdDashboard
  Dashboard application that collects and displays realtime car telemetry information such as speed, rpm, throttle, etc using a raspberry …
  ☆78Updated last year
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆94Updated 2 years ago
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆60Updated 6 years ago
• fanyi3315 / bosch-med17-block-reader
  Decode blocks out of a Bosch MED17 ECU internal flash / EEPROM dump
  ☆18Updated 5 years ago
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆42Updated 3 years ago
• kmalinich / MSS52-XDF
  TunerPro XDF for BMW MSS52 used with S62B50 engine.
  ☆17Updated 2 years ago
• wjcloudy / DBCtoRDXML
  File converter from DBC to RealDash XML
  ☆16Updated last month