Alternatives and similar repositories for Digital-Dashboard

Users that are interested in Digital-Dashboard are comparing it to the libraries listed below

• notchum / OBD_Gauge
  An Arduino-powered automotive gauge using OBDII.
  ☆10Updated 4 years ago
• klosik007 / VAG-Looker
  Parser for VCDS's .lbl and .clb files
  ☆11Updated 2 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆20Updated last year
• tomaskovacik / VAGRadioRemote
  arduino library for remote controling V.A.G. radios
  ☆11Updated 4 years ago
• daveykropf / obd2-oled-arduino
  Made a simple Mini OBD2 OLED Display reader for my VW Golf MK6 (WIP)
  ☆13Updated 6 years ago
• cjtejada / QtDigitalInstrumentCluster
  Qt OBD II Digital Instrument Cluster
  ☆60Updated 2 years ago
• hoke-t / OBDLive
  Django app that visualizes OBD-II diagnostic data and DTCs communicated through a PICAN2 board on a Raspberry Pi.
  ☆11Updated 6 years ago
• jglim / ExpressOBD
  Free control utility for your ELM327-based OBD2 device to clear MIL ("Check Engine Light")
  ☆35Updated 7 years ago
• 360trev / ME7_95040sum
  BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…
  ☆12Updated 12 years ago
• stephendpmurphy / ME7.X_Correction
  GUI for the Bosch ME7.X checksum check and correction CL utilities
  ☆17Updated 3 years ago
• rlinewiz / OpenMoose
  Read and write your Volvo ECU (Bosch ME7) using a DiCE cable. Early working version assembled from various abandoned projects. Its old an…
  ☆14Updated 2 years ago
• BiggRanger / CANBUS-Vehicle-Reverse-Engineering
  My CANBUS documentation for my 2006 Grand Cherokee, 2008 Durango, 2010 Wrangler
  ☆23Updated 4 years ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆77Updated 2 years ago
• fanyi3315 / bosch-med17-block-reader
  Decode blocks out of a Bosch MED17 ECU internal flash / EEPROM dump
  ☆18Updated 5 years ago
• equinox311 / open-can-db
  An open automotive CANbus database set made to reduce public obscurity in the CAN architecture of vehicles
  ☆20Updated 5 years ago
• AmesisProject / AP_ME7.xxTunerMap
  Sofrware to tuning ME7.xx Family
  ☆13Updated 3 years ago
• v-ivanyshyn / Arduino-OBD2-Async
  Arduino OBD library with asynchronous data requesting.
  ☆18Updated 6 years ago
• shchers / ecu-simulator
  OBD-II ECU Simulator
  ☆64Updated 4 years ago
• pestadieu / OBDSimulator
  A simple OBD-II simulator software
  ☆15Updated 7 years ago
• 360trev / ME7Sum
  BSD Licensed tool written in C for management of Bosch ME7.x firmwares, config files are specifically targeted at Ferrari 360 in current …
  ☆19Updated 2 years ago
• thomastech / CAN2Cluster
  CAN-Bus Emulator for Controlling Automotive Dashboard Instrument Clusters
  ☆40Updated last year
• gmenounos / vwcluster
  ☆23Updated 2 months ago
• darkspr1te / J2534-pic
  *on hold * Implement J2534 interface with a cheep Chinese elm327 copy (pic18f25k80)
  ☆18Updated 7 years ago
• brian03079 / piObdDashboard
  Dashboard application that collects and displays realtime car telemetry information such as speed, rpm, throttle, etc using a raspberry …
  ☆79Updated last year
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆83Updated 10 years ago
• michaeldove / vagtuner
  Volkswagen Audi Group CANBus diagnostic and ECU firmware flashing
  ☆35Updated 8 years ago
• RXTX4816 / OBD-KKL-KW1281-ARDUINO-TRIPCOMPUTER
  Display information of your KW1281 K-Line VAG vehicle on a display controlled by an Arduino Uno (Or similar).
  ☆31Updated 9 months ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆39Updated last year
• fabiankuffer / arduino-obd2-sim-code
  Arduino OBD2 Simulator
  ☆12Updated 6 years ago
• olegel / CANLogger
  CAN bus logger and analyser tool
  ☆63Updated 6 years ago