Alternatives and similar repositories for DTCController

Users that are interested in DTCController are comparing it to the libraries listed below

• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 4 years ago
• vtl / volvo-cem-cracker
  Volvo central electronic module pin cracker via OBD for P1, P2 and P3 platforms
  ☆162Updated last week
• ludwig-v / arduino-psa-comfort-can-adapter
  Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)
  ☆67Updated 6 months ago
• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆68Updated last year
• tomaskovacik / vwcdavr
  AVR alternative to vwcdpic HW+SW
  ☆59Updated 3 years ago
• morcibacsi / PSAVanCanBridge
  VAN - CAN protocol bridge (V2C) for cars made by PSA Group (Peugeot, Citroen)
  ☆156Updated this week
• turboat / eepromtool
  ☆52Updated 2 years ago
• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆51Updated 7 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆104Updated 4 years ago
• ibanezgomez / FISBlocks
  Device based on Arduino to play with VAG KWP1281
  ☆124Updated 7 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆51Updated 9 months ago
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆157Updated last week
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆284Updated 2 years ago
• ludwig-v / arduino-psa-diag
  Arduino sketch to send UDS / KWP diagnostic frames over CAN-BUS to PSA/Stellantis cars (Peugeot, Citroen, DS, Opel)
  ☆196Updated 7 months ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆88Updated 10 years ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆111Updated 5 months ago
• tomaskovacik / VAGFISWriter
  Arduino library for writing to V.A.G. cluster display over 3line protocol (no can-bus)
  ☆23Updated 3 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆119Updated 3 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆64Updated 7 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆37Updated 5 years ago
• gmenounos / kw1281test
  VW KW1281 Protocol Test Tool
  ☆213Updated last month
• andrewgabler / VolvoDIMLib
  Library to power and control your Volvo DIM/Cluster
  ☆14Updated last year
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆81Updated 3 weeks ago
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆95Updated 2 years ago
• prometey1982 / VolvoTools
  ☆55Updated 2 weeks ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆344Updated 11 months ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆315Updated 9 months ago
• Eztys / SimpleKDS
  ☆25Updated 8 years ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆68Updated 2 years ago
• sepp89117 / Opel_Astra_H_opc_CAN-GaugeV2
  New version, looks like BC from Nissan GT-R and uses large touchscreen
  ☆17Updated last year