JPEWdev / pyhid-usb-relayLinks
Python script for controlling dcttech USB HID relay modules
☆27Updated last year
Alternatives and similar repositories for pyhid-usb-relay
Users that are interested in pyhid-usb-relay are comparing it to the libraries listed below
Sorting:
- miscellaneous stuff / unsorted☆99Updated 3 weeks ago
- WIP, does NOT work yet. See https://github.com/novag/LoRa-ATtiny-Node for a working version made for the ATtiny85.☆12Updated 4 years ago
- EEPROM tool for Silabs CP210x USB-Serial adapter☆64Updated last year
- Distribution of Arduino driver for MCP2517FD CAN controller (CANFD mode)☆79Updated 6 months ago
- USB HID Sensor implementation for PIC16F1454 and STM32F072☆35Updated 3 years ago
- Ethernet on STM32 using external PHY☆54Updated last week
- GitHub action to build ESP32 project using esp-idf☆10Updated last year
- A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.☆23Updated last year
- A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.☆26Updated 4 years ago
- Flash firmware to STM32 microcontrollers using Python.☆121Updated last year
- A Linux kernel driver for ch341 emulating the I2C bus☆76Updated 4 years ago
- ☆23Updated 11 months ago
- Modbus Master and Slave RTU Library for Raspberry PI Pico using FreeRTOS and C++ SDK☆59Updated 7 months ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago
- Semtech's LoRa RF drivers for mbed OS☆34Updated 5 years ago
- Open source flash program for STM32 using the ST serial bootloader (https://sourceforge.net/projects/stm32flash)☆55Updated 4 years ago
- ☆39Updated last week
- LoRa Basics™ Loader☆37Updated 6 years ago
- Zephyr out of tree build for image with cyw43-driver☆22Updated 5 months ago
- GUI Configuration tool for WIZnet serial to ethernet devices.☆24Updated 2 months ago
- Generic Node Sensor Edition☆122Updated 2 years ago
- This repository is a place to manage hardware-related data created by WIZnet.☆72Updated last week
- Raspberry Pi Pico USB I/O Board☆82Updated 3 years ago
- A fast flasher/debugger for RP2040 based devices (runs on Raspberry Pi Pico)☆85Updated last year
- Code examples, errata and additional tips and references to interesting projects for the book "Develop your own Bluetooth Low Energy Appl…☆54Updated 2 years ago
- CLI utility for programming CP210x USB<->UART bridges☆111Updated 4 years ago
- A set of python scripts to create dfu files and upload them to stm32 boards☆81Updated 4 years ago
- nrf24l01 linux device driver☆26Updated 3 years ago
- Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)☆68Updated 10 months ago
- The com2tcp utility that comes with com0com updated to compile under MS Visual Studio C++ 2017.☆56Updated 7 years ago