Alternatives and similar repositories for CanNode:

Users that are interested in CanNode are comparing it to the libraries listed below

• nxp-appcodehub / ap-ml-state-monitor
  This software pack enables developers to develop and deploy neural networks on MCU-based systems for building smart sensing applications.…
  ☆12Updated 9 months ago
• metro94 / RV-DAP-Plus
  ☆25Updated 3 years ago
• wzab / esp-wifi-xvc
  Wi-Fi enabled XVC programmer/debugger based on ESP8266
  ☆12Updated 9 years ago
• stnolting / cjtag_bridge
  🔌 Compact JTAG ("cJTAG") to 4-wire JTAG (IEEE 1149.1) bridge.
  ☆24Updated 3 years ago
• Infineon / abstraction-rtos
  The RTOS Abstraction APIs allow middleware to be RTOS aware, without depending on a specific RTOS.
  ☆18Updated last month
• michahoiting / rv-link
  RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …
  ☆27Updated 4 years ago
• eltvor / zlogan
  High-througput logic analyzer for FPGA
  ☆14Updated 4 years ago
• karlp / discotmc
  USBTMC DAC firmware for the stm32f4 discovery board
  ☆24Updated 10 years ago
• RadioOperator / stm32f103_dual_vcp
  An example to show how to use dual CDC VCP USB interfaces.
  ☆9Updated 4 years ago
• PulseRain / Arduino_RISCV_IDE
  PulseRain RISC-V board manager package for Arduino IDE
  ☆13Updated 3 years ago
• Wren6991 / Hazard3-SWD-SoC
  Example Hazard3 + OpenDAP RISC-V SWD SoC integration
  ☆9Updated 2 years ago
• vsergeev / arm-bmw-sw
  ARM Bare Metal Widget (arm-bmw) software
  ☆19Updated 8 years ago
• InfiniteYuan / embedded-driver-library
  Embedded driver library
  ☆15Updated 4 years ago
• PetteriAimonen / ebike-controller
  Chibios-based ebike controller
  ☆15Updated 3 weeks ago
• iDoka / asic-pinout-drawer
  Simple pin assignment generator for IC case
  ☆19Updated 8 years ago
• INTI-CMNB / Lattuino_IP_Core
  An Arduino UNO compatible implementation for the iCE40 FPGAs
  ☆20Updated 4 years ago
• OpenAutomationTechnologies / openPOWERLINK_Qt_App
  Advanced QT app for openPOWERLINK v2.x
  ☆9Updated 10 years ago
• roy77 / Cameralink-LPC-FMC-Module
  ☆19Updated 9 years ago
• antmicro / renode-board-visualization
  ☆17Updated last year
• icebreaker-fpga / icebreaker-v2-usb-firmware
  Firmware to implement USB communications on the CH32V307 microcontroller
  ☆11Updated 2 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• wuhanstudio / picorv32_MXO2
  A 32 bit RISC-V SoC (picorv32) on Lattice MXO2 (step fpga)
  ☆9Updated 4 years ago
• martonmiklos / STLINK-V3-BRIDGE_libusb
  STLINK-V3-BRIDGE API which does not uses the ST's libSTLinkUSBDriver but uses libusb
  ☆17Updated 3 months ago
• zhuhuijia0001 / microchip_tcpip_stack_ch32v307
  Transplant microchip tcpip stack to wch risc-v kernel mcu ch32v307
  ☆11Updated 2 years ago
• myildirim10 / CANopenNode-Easy-Port
  This project was made to more easily "port" the CANopenNode open source library. Contains sample projects made with STM32, ESP32, TI (TMS…
  ☆11Updated last year
• deadsy / jaylink
  Go bindings for the libjaylink library.
  ☆8Updated 2 years ago
• apache / mynewt-nffs
  Apache NFFS filesystem
  ☆30Updated 9 months ago
• esynr3z / openocd-svd
  Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python
  ☆33Updated 6 years ago
• libc0607 / ch552-ag1k-msd
  Load bitstream to AG1K series FPGA using CH552
  ☆12Updated 3 years ago
• Lichee-Pi / LicheeTang_openocd
  forked from https://github.com/riscv/riscv-openocd.git,and add falsh support for LicheeTang
  ☆25Updated 3 years ago