Alternatives and similar repositories for 18650_tester_software

Users that are interested in 18650_tester_software are comparing it to the libraries listed below

• actiBMS / actiBMS_module_circuit
  This repository contains the design files for actBMS cell module.
  ☆10Updated 5 years ago
• valerun / VMCharger
  Open Source DC Charger for Electric Vehicles - up to 50kW
  ☆14Updated 10 years ago
• batterysim / nissan-leaf-data
  Battery cell data from a 2013 Nissan Leaf
  ☆23Updated 3 years ago
• MuellerDominik / theBMS
  Battery Management System with Active Cell Balancing
  ☆29Updated 6 years ago
• offgridsystems / Documents
  Component data sheets, busbars and files needed to build no-weld BMS DKblock style battery packs. Here is a YouTube video, courtesy of …
  ☆43Updated last year
• csatt / IV_Swinger
  Hardware and software documentation and code for an open source IV curve tracer for photovoltaic solar panels.
  ☆28Updated 2 months ago
• scttnlsn / cell-monitor
  Battery cell monitor and balancer
  ☆35Updated 2 weeks ago
• MartinStokroos / openMicroInverter
  An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.
  ☆67Updated last year
• MuellerDominik / BMS-Software
  Python 3 Software for the Battery Management System with Active Cell Balancing
  ☆12Updated 6 years ago
• dcambron / State-of-Charge-Estimator
  Python script for adaptive estimation of State of Charge for LiFePO4 battery pack.
  ☆35Updated 9 years ago
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆148Updated last year
• petersdw1 / Battlab-One
  A New Tool for Estimating and Optimizing Battery Life for Your Next Internet of Things Project
  ☆62Updated 2 years ago
• scottbez1 / KiKit
  Automation tools for KiCAD
  ☆9Updated 4 years ago
• gonzojive / solar
  Open source Maximum Power Point Tracking (MPPT) and inverter hardware/software for photovoltaic projects.
  ☆43Updated 5 years ago
• phschoen / unisolder
  universal soldering controller - a copy of http://dangerousprototypes.com/forum/viewtopic.php?t=7218
  ☆29Updated 6 years ago
• jogrady23 / kalman-filter-battery-soc
  A Kalman Filter that estimates the state of charge of 2 Li-ion cells
  ☆76Updated 6 years ago
• marcoreps / linuxcnc_leadshine_EL8
  LinuxCNC configuration with EtherCAT Servo Drives Leadshine EL8 and some Beckhoff IO Modules
  ☆31Updated 8 months ago
• grblHAL / Controllers
  List of controllers supported by grblHAL
  ☆45Updated 2 months ago
• turhancan97 / LLC-Resonant-Converter-and-Battery-Charge-Discharge-Regression-Model
  Turhan Can Kargın BACHELOR OF SCIENCE GRADUATION PROJECT
  ☆21Updated 4 years ago
• hasenbanck / heteromycin
  A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
  ☆39Updated 5 years ago
• OpenDRO / OpenDRO
  Arduino code. Eagle schematic and board files.
  ☆12Updated 9 years ago
• geshan99 / BMS-Project
  Battery Management System with battery balancer and Kalman Filter based SoC estimation for lithium iron battery pack
  ☆13Updated 2 years ago
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆64Updated 2 months ago
• EnnoidMe / ENNOID-BMS-Tool
  The ENNOID-BMS Tool can be used to configure ENNOID-BMS.
  ☆34Updated 2 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• dronecz / ESP32-Reflow-Controller
  Reflow controller with ESP32 and TFT LCD on board.
  ☆68Updated 4 months ago
• Miceuz / VFD
  Open source Variable Frequency Drive for Induction Motor.
  ☆20Updated 11 years ago
• LibreSolar / bms-c1
  16s / 100A Battery Management System
  ☆153Updated 8 months ago
• AdaYuanChen / Supycap
  Analysis tool for the CC and CV experiment of supercapacitors
  ☆13Updated 3 years ago
• tvixen / diy-BMS-with-Arduino-Nano
  If you have a private powerwall of 18650 cells, this is the battery management system you need. The small PCB is equipped with the cheap …
  ☆42Updated 6 years ago