sikra-io / open-lithium-bms
Gerbers, BOM, and Schematics for Open UpCell [1S]
☆23Updated 2 years ago
Alternatives and similar repositories for open-lithium-bms:
Users that are interested in open-lithium-bms are comparing it to the libraries listed below
- Serial port emulation over CAN bus☆28Updated 2 years ago
- a custom board to monitor custom battery packs☆16Updated 8 months ago
- Multi-sensor intelligent environmental Monitor☆15Updated 10 months ago
- Dual brushed motor ESC firmware compatible with brushless motor ESCs☆25Updated 8 months ago
- Portable Programmable Power Supply☆39Updated last month
- ☆12Updated last year
- CH340C based ESP32 programmer module pcb with auto- programming & reset, sponsored by PCBWay.☆39Updated last week
- An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)☆29Updated last year
- ☆30Updated last month
- Simple design for 16x2 OLED Character Display using the US2066 chip☆11Updated last year
- cupl Tag Firmware and Hardware☆15Updated 2 years ago
- kitchen timer☆16Updated last year
- ESP8266 reflow controller☆23Updated 2 years ago
- CH330 breakout board☆26Updated 2 years ago
- Bluetooth LE temperature controller for the 946C electronic hot plate☆103Updated 9 months ago
- Rigol oscilloscope remote control, mainly for use with https://github.com/Ebiroll/esp32_sigrok☆22Updated 4 years ago
- CH32V003 Tristate Multiplexing LED☆26Updated last year
- Protocol implementation for HLK-LD2410 radar module☆21Updated last year
- PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY☆42Updated 3 years ago
- Tiniest USB-C LiPo charger☆33Updated 2 years ago
- Introducing OpenRad, a simple radiation monitoring solution powered by the SBM-20 GM tube and TTGO ESP32 microcontroller. this project of…☆53Updated last month
- Power Supply Analyzer with USB Interface☆49Updated 2 years ago
- Simple ESP8266 board to drive WS2812 LED strips☆18Updated 2 years ago
- A PoE+ mikroBUS mainboard based on the ESP32☆48Updated last year
- ☆103Updated 2 years ago
- ESP32 IOT light switch that will be tiggerable via MQTT, web interface and of course the button☆52Updated 9 months ago
- DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.☆32Updated 3 years ago
- Otter's KiCAD-libs☆14Updated last month
- Extend the possibilities of cheap digital power supplies with a WiFi module☆57Updated 10 months ago
- OpenFAN Micro is open-source open-hardware DIY fan controller for 5V and 12V fans with built in Web GUI and Web API☆15Updated 3 months ago