GMMan / st-link-hackLinks
An exploration into unsafely written code
☆74Updated 2 years ago
Alternatives and similar repositories for st-link-hack
Users that are interested in st-link-hack are comparing it to the libraries listed below
Sorting:
- FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)☆43Updated last year
- eMMC WFBGA153 to microSD card adapter PCB☆69Updated last year
- ☆105Updated 4 years ago
- STM32F0x Protected Firmware Dumper with Raspberry Pi Pico☆177Updated last year
- Utility for encrypting/decrypting ST-Link firmware images☆125Updated 9 years ago
- JTAG Versaloon firmware for the STM32 Bluepill board☆143Updated 3 years ago
- WeAct LogicAnalyzerV1 : A logic analyzer based on Cypress CY7C68013A / Corebai CBM9002A☆113Updated last year
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆69Updated 3 months ago
- Black Magic Probe firmware.☆35Updated last year
- Simple ISP Flash Tools for various Microcontrollers☆112Updated 7 months ago
- Tool to program RL78 MCUs via serial bootloader☆75Updated last year
- esp32 wifi debugger for ARM Cortex microcontrollers https://github.com/blacksphere/blackmagic☆101Updated 7 months ago
- simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board☆37Updated 5 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆55Updated 3 years ago
- A clone of the ST-Link V2.1 with the VCP+MSD+SWO features available.☆72Updated 4 years ago
- A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader☆63Updated 5 months ago
- Firmware uploader for ST-Link☆70Updated last year
- USB Power Delivery Testing Device and Variable Power Supply☆154Updated 3 months ago
- Yet Another Picoprobe☆177Updated last week
- USB Type-C Power Delivery Trigger and Monitoring Board☆96Updated 2 years ago
- ☆91Updated last year
- ☆72Updated 3 years ago
- Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)☆67Updated 8 months ago
- ☆34Updated last year
- A intelligent Power supply with micro control and logging, for very long test (battery cycles)☆72Updated 5 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- How to Program and Recover Chinese Clone of the st-link v2 and reflash it to segger j-link☆71Updated last year
- USB Power Delivery for Arduino☆101Updated last year
- ST-Link dumper firmware☆53Updated last year
- Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD☆70Updated 9 months ago