hoberman / Victron_BLE_Advertising_exampleLinks
☆29Updated 6 months ago
Alternatives and similar repositories for Victron_BLE_Advertising_example
Users that are interested in Victron_BLE_Advertising_example are comparing it to the libraries listed below
Sorting:
- Solar-Booster: the different MPPT Solar Charge Controller☆28Updated 2 years ago
- Setup a sensor network using Meshtastic mesh network and MQTT broker☆27Updated 5 months ago
- support for the VE.Direct serial protocol supported by many Victron Energy products☆22Updated 8 months ago
- Alexa controlled alarm system with ESP32-CAM and HC-SR501 PIR module.☆17Updated 3 years ago
- Read and Write Library for Overkill Solar BMSs☆17Updated 2 years ago
- Extend the possibilities of cheap digital power supplies with a WiFi module☆58Updated last year
- ☆17Updated last year
- TTGO Lora Test code☆17Updated 4 years ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago
- ☆42Updated 3 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app - …☆59Updated 4 years ago
- An event-driven library for ESP32 implementing PZEM-004T v3.0 / PZEM-003 / PZEM-017 Modbus-RTU proto☆28Updated 11 months ago
- Simple NTP server with GPS satellites synchronization.☆30Updated last year
- EPSolar Solar Charge Controller to MQTT☆43Updated 3 years ago
- Particulate matter sensor using LoRaWAN as the transport mechanism☆11Updated 2 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.☆65Updated 6 years ago
- ☆30Updated 3 years ago
- Wifi to 3x Serial bridge based on a ESP32☆77Updated 10 months ago
- Automatic long-term logging for remote ESP32 IoT devices, by the Web Browser or an CURL script☆14Updated 5 years ago
- This is a RF signal encode and decode library that can be adapted to different protocols by specifying the timing conditions is a table. …☆38Updated 2 years ago
- Particle sensor manager for multiple sensors: Honeywell, Plantower, Panasonic, Sensirion, etc. This is sensors layer of CanAirIO project …☆38Updated 3 months ago
- Project to sync analog clocks to a few milliseconds.☆40Updated last year
- Code to make experiment on TTN Mapper with GPS and TTGO☆56Updated 5 years ago
- Read the Bluetooth advertised data from a Victron Battery Monitor or Solar Charger, without (or in addition to) using the VictronConnect …☆48Updated 2 weeks ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆108Updated 10 months ago
- Sailor Hat for ESP32 hardware☆46Updated 7 months ago
- Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display☆21Updated 4 years ago
- datasheet and Arduino demo code for LoRa Radio Node v1.0☆48Updated 7 years ago
- Tiny Uploader, a tool to generate you project one click uploader☆28Updated last year
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago