zonque / 121gw-qt5
A Qt5 based application for the 121GW BLE enabled multimeter
☆11Updated 6 years ago
Alternatives and similar repositories for 121gw-qt5:
Users that are interested in 121gw-qt5 are comparing it to the libraries listed below
- A simple M.2 NVMe to miniPCIe adapter☆24Updated last year
- Vector CANdb++ file parser☆23Updated last year
- Theengs mobile application to read BLE sensors and push data to an MQTT broker☆42Updated 2 months ago
- PCBs designed by Icenowy☆27Updated 3 years ago
- Firmware for standalone (P)ATA/ATAPI CD Player☆14Updated last year
- Downloadable prebuilt AppImages for KiCad☆14Updated 5 years ago
- Battery Tester, Milliohm Meter, Software☆25Updated last year
- A simple display graphics editor, mostly useful for the VESC Wand☆11Updated 2 years ago
- A smart fan controller use a STM32 MCU to cooling a LED light . The controller have 3 main function. 1.A GPIO generate a 25KHz PWM signal…☆10Updated 7 years ago
- Prefilter for 433 MHz remotes (and similar protocolls) written for an attiny45☆19Updated 10 years ago
- PicoQuake: USB vibration sensor☆17Updated last month
- Optimized OpenSource firmware for TongSheng TSDZ2 mid drive ebike motor☆11Updated last year
- Solar/Wind MPPT charge controller for DIN rail mounting☆16Updated 4 years ago
- Rigol oscilloscope remote control, mainly for use with https://github.com/Ebiroll/esp32_sigrok☆24Updated 4 years ago
- Ein Softwarebaukasten für den Aufbau/Umbau von Radios auf Raspberry Pi Basis☆28Updated 8 months ago
- OpenTracker PCB related files☆17Updated 6 years ago
- UCAN is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linux/win/mac mu…☆27Updated last year
- Schematics, board layout and BOM☆11Updated 5 years ago
- ☆23Updated 6 years ago
- Lorris is GUI frontend for nearly anything you give it. You can use serial port, socket or file as source. Well, at least will be, right …☆34Updated 2 years ago
- Website and protocol specification☆14Updated 2 months ago
- Hardware resources for the optical pulse sensor☆11Updated 3 years ago
- Owon oscilloscope USB interface in QT☆23Updated 8 years ago
- Full Featured Arduino library for the SI4713 FM transmitter chip☆11Updated 2 years ago
- MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices. Initial goal was to …☆17Updated 3 years ago
- A Dali master communication interface using custom circuit and openwrt on TP-Link MR-3020☆28Updated 4 years ago
- Qt-based software for USB2Sniffer☆31Updated 3 years ago
- gsusb firmware for USB CAN converter☆14Updated 3 years ago
- Simple WCH MCU tool to flash over usb (compatible with WCH CH569 & CH565)☆12Updated 8 months ago
- Open Source MPPT for Lithium Batteries. Based on TI controller☆15Updated 7 years ago