Caraffa-git / PCB-ArtLinks
Repository for PCB/silkscreen art 🎨
☆21Updated 4 months ago
Alternatives and similar repositories for PCB-Art
Users that are interested in PCB-Art are comparing it to the libraries listed below
Sorting:
- An alternative PCB pawprint for the Tag-Connect TC2030 pogo pin programming cable☆123Updated last year
- Voltage glitching exploit tool against the CCxxxx family of chips to bypass readout protection☆94Updated last year
- A cheaper and open-hardware version of the blasoned Sensepeek's PCBite for Hardware Hacking and DIY Hobbyists☆100Updated 5 months ago
- LAEMP-Panel is a Zigbee controllable (e.g. philips hue) RGBY + W spot.☆101Updated 2 years ago
- USB PD sniffer☆196Updated 5 months ago
- SC14CVMDECT DEVBOARD☆13Updated 6 months ago
- My experiment with nixie tubes.☆143Updated 3 months ago
- ☆42Updated 4 years ago
- Bus Pirate Firmware for v5 and above☆211Updated last week
- A smol and simple STM32G431 based Analog to USB toolkit.☆67Updated last year
- ☆12Updated last year
- Self-contained 5W Class-D amplifier inside a Speakon connector☆43Updated 8 months ago
- Design files for the PatchLoop PCB(s)☆37Updated 2 years ago
- A 1.7kW USB-C PD power supply☆103Updated last year
- Adding a CC1101 module to SRXE☆124Updated 5 years ago
- Super simple USB sniffer using Raspberry Pi Pico.☆99Updated 9 months ago
- High Speed Data Acquisition over HDMI - Userspace library☆218Updated 2 months ago
- ☆19Updated 2 months ago
- This repository contains our software tool, ecoEDA, presented in the paper "ecoEDA: Recycling E-Waste during Electronics Design", which a…☆131Updated last year
- High Speed Data Acquisition over HDMI - RP2350 HSTX implementation☆201Updated 5 months ago
- ☆70Updated 7 months ago
- Glitchy is a no-code visual interface to the world of microcontroller glitching.☆95Updated 2 years ago
- A basic custom firmware to show a running example on the TN2115S2 SoC inside of the Passive NFC E-Paper Displays from Waveshare☆54Updated 2 years ago
- ch32v003 USB Driver for 3-digit 7-segment TN LCDs with touch☆198Updated 10 months ago
- HydraFW dedicated to HydraBus v1 / HydraNFC Shield v2☆48Updated last week
- Design files for the BAPPR LED buck converter☆43Updated last year
- Mainboard replacement for Nokia 3310☆58Updated 4 months ago
- USB-C ports made from a flex PCB and an ATtiny84A☆40Updated 3 years ago
- ☆247Updated last year
- STM32F0x Protected Firmware Dumper with Raspberry Pi Pico☆172Updated last year