Alternatives and similar repositories for BPI-Schematics

Users that are interested in BPI-Schematics are comparing it to the libraries listed below

• techtoys / SSD2805
  MIPI Display Master Bridge IC Driver and Application Development
  ☆20Updated 11 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• Hyvok / USB-GPIB-adapter
  USB->GPIB adapter project which uses an AVR ATMega16U4 microcontroller. Project files include schematics and PCB layout (made with KiCAD)…
  ☆16Updated 12 years ago
• ribalda / fx2eeprom
  FX2 EZ USB eeprom reader/writer for libusb
  ☆29Updated 2 years ago
• gbulmer / openstm32hw
  Open Source Hardware for STM32, complementing openstm32
  ☆48Updated 11 years ago
• esden / floss-jtag
  Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H
  ☆31Updated 8 years ago
• noduino / CamGo
  Smart Home Gateway for 315MHz, 433MHz Sensors, Switches ...
  ☆12Updated 9 years ago
• crteensy / STM32F030F4P6-breakout-board
  STM32F030F4P6 breakout board pcb files and example code
  ☆14Updated 9 years ago
• george-hopkins / esp8089-spi
  SPI kernel driver for ESP8089 devices
  ☆15Updated 10 years ago
• esden / pretty-eagle-libs
  Eagle libraries pretty footprints...
  ☆39Updated 10 years ago
• andysworkshop / awreflow
  Andy's Workshop Reflow Oven Controller
  ☆33Updated 7 years ago
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 4 years ago
• al177 / esp_hat
  ESP8266 based Raspberry Pi WiFi module
  ☆26Updated 9 years ago
• smdprutser / SWM050
  ☆19Updated 6 years ago
• andysworkshop / nanocounter
  An FPGA/STM32 based frequency counter with an Android user interface
  ☆28Updated 9 years ago
• avafinger / ov5640
  Improved OV5640 for Orange Pi (H3) / Nano Pi (H3) / Banana Pi M64 / Pine64+ / Nano Pi M2/M3 (Experimental)
  ☆28Updated 8 years ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 5 years ago
• pierre-muth / pilogger
  Home logging station
  ☆12Updated 4 years ago
• EspressifSystems / esp-open-sdk
  Free and open (as much as possible) integrated SDK for ESP8266 chips
  ☆21Updated 10 years ago
• richard-sim / openpnp-linear-rails
  An OpenPnP compatible SMT pick and place machine with linear rails based on Anthony Webb's build on hackaday.io.
  ☆13Updated 8 years ago
• ARMinARM / arminarm
  Setup and install for ARMinARM board.
  ☆29Updated 9 years ago
• tuxyme / metal-pi
  Raspberry PI bare metal
  ☆47Updated 11 years ago
• OLIMEX / eduArdu
  Open Source Hardware Educational board based on Arduino Leonardo
  ☆23Updated 5 years ago
• dl3yc / fx2fw-sdcc
  FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2
  ☆22Updated 10 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• ivanovp / blue_flash
  SPI NOR flash programmer using Blue Pill (STM32 development board)
  ☆19Updated 7 years ago
• ElTangas / STK2UPDI
  STK500 compatible UPDI programmer firmware for Arduino
  ☆28Updated 7 years ago
• JacekGreniger / gpib-converter
  GPIB to USB converter
  ☆11Updated 11 years ago
• cyrozap / HDMI-to-MIPI
  Design files for an HDMI to MIPI-DSI adapter with support for the LG LH550WF1-SD01 LCD panel
  ☆65Updated 2 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago