intel / edison-bcm43340Links
☆11Updated 9 years ago
Alternatives and similar repositories for edison-bcm43340
Users that are interested in edison-bcm43340 are comparing it to the libraries listed below
Sorting:
- DISCONTINUATION OF PROJECT. This project will no longer be maintained by Intel. Intel will not provide or guarantee development of or s…☆36Updated 2 years ago
- This is the official distribution of the Intel(R) Reference Operating System for the Internet of Things, or Intel(R) REF-OS-IOT for short…☆23Updated 3 years ago
- Tools to pull data off of a NAND flash chip using a Digilent Nexys-2 board.☆31Updated 11 years ago
- ☆33Updated 2 years ago
- Example baremetal programs for some allwinner boards.☆13Updated 6 years ago
- Memory stress testing tool, implemented by combining http://limadriver.org/ and http://pyropus.ca/software/memtester/☆39Updated 8 years ago
- 64-bit U-Boot for the Raspberry Pi 3☆27Updated 9 years ago
- ☆44Updated 5 years ago
- ☆23Updated 5 years ago
- tiny embedded MIPS virtualization platform - a very small and lean hypervisor using MIPS R5 hardware VZ option for embedded systems (IoT …☆19Updated last year
- modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications☆5Updated 8 years ago
- Greybus Specification☆23Updated last year
- USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad☆21Updated 12 years ago
- UEFI, on Loongson.☆14Updated 8 years ago
- Raspberry Pi GDB remote serial protocol stub☆40Updated 8 years ago
- Fork of OpenOCD with NuttX thread support.☆24Updated 6 years ago
- QEMU bare metal test for validating TrustZone support☆10Updated 10 years ago
- An attempt at an open source toolchain for the Hexagon DSP☆38Updated 7 years ago
- Tool for communicating with Sahara protocol (DBL) on iPhone4 CDMA, iPhone4s, and iPhone5 (Apple SAH Protocol)☆21Updated 12 years ago
- Tegra BCT and bootable flash image generator/compiler☆30Updated 5 years ago
- Implementation of the ARM SWD (Serial Wire Debug) protocol in Python for use with low-cost development boards to manage and flash Cortex …☆33Updated 10 years ago
- ☆53Updated 7 years ago
- Tutorial/starter code for setting up GCC for PSOC5 (ARM) in an open-source baremetal configuration.☆33Updated 10 years ago
- crosstool-works☆13Updated 4 years ago
- Open Hardware SPI programmer based on FTDI FT232H☆23Updated 12 years ago
- Some Python scripts to program Xilinx FPGAs using OpenOCD☆24Updated 8 years ago
- LPC1759 USB bootloader based on a Mass Storage Device☆13Updated 8 years ago
- Starting point for bare metal development and JTAG debugging on Raspberry Pi 3.☆28Updated 7 years ago
- NuttX port to Fernvale platform☆26Updated 8 years ago
- Standalone libSboot for U-boot☆22Updated 12 years ago