ArcaneNibble / project-nanjingLinks
WCH BLE MCU reverse engineering (CH579)
☆14Updated last year
Alternatives and similar repositories for project-nanjing
Users that are interested in project-nanjing are comparing it to the libraries listed below
Sorting:
- SDK sch&layout reference design and datasheet documention☆65Updated last year
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆55Updated 3 years ago
- Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA☆32Updated 3 years ago
- Documenting the Anlogic FPGA bit-stream format.☆88Updated 2 years ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆84Updated 2 years ago
- Farpatch debugger software layer, backed by Black Magic☆55Updated last month
- Opensource embedded controller firmware for sipeed boards.☆43Updated 6 years ago
- This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…☆18Updated 3 years ago
- ☆25Updated 5 years ago
- ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.☆69Updated 2 years ago
- AGM bitstream utilities and decoded files from Supra☆46Updated 3 months ago
- Notes for Colorlight-5A-75B.☆49Updated 11 months ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆42Updated 6 years ago
- WCH CH569 SerDes Reverse Engineering☆27Updated 3 years ago
- Blob-free logic analyzer firmware for FX3☆83Updated 2 years ago
- Tiny tips for Colorlight i5 FPGA board☆58Updated 4 years ago
- Track Length Calculator☆24Updated last year
- CH55x USB to JTAG bridge☆139Updated 8 months ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆27Updated 2 years ago
- USB-JTAG Adapter Using CH552☆70Updated 3 years ago
- USB-Blaster instance on CH55x MCU.☆51Updated 6 years ago
- Standalone OpenOCD and CMSIS-SVD based peripheral register viewer written on Python☆33Updated 6 years ago
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆24Updated 2 years ago
- USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)☆58Updated 5 years ago
- RV-Debugger-BL702 Project, an opensource debugger implement☆209Updated last year
- ☆25Updated 4 years ago
- usb-jtag - Altera USB Blaster Emulation with a FX2☆72Updated 2 weeks ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader☆59Updated 4 months ago
- ☆25Updated 2 years ago