zoobab / tjtag-arduino
Use the arduino as a JTAG adaptor with Tjtag
☆47Updated 4 years ago
Alternatives and similar repositories for tjtag-arduino:
Users that are interested in tjtag-arduino are comparing it to the libraries listed below
- Broadcom CFE Bootloader☆40Updated 2 years ago
- TJTAG JTAG flash programmer for WRT54G and related routers with Raspberry Pi support☆85Updated 6 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆114Updated 10 years ago
- Emulates a Bus Pirate OpenOCD JTAG adapter with an Arduino Due☆48Updated last month
- Dump NOR/Parallel FLASH memory chips using an Arduino or Raspberry Pi☆43Updated 7 years ago
- Projects for playing with a China-sourced el-cheapo STM32F103C8T6 development board☆24Updated 5 years ago
- migrated from Dangerousprototypes google code "Downloads"☆27Updated 6 years ago
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- Userspace utility to set sunxi disp2 HDMI resolution via ioctl☆21Updated 7 years ago
- JTAG/On-Chip-Debugger via a Raspberry Pi.☆133Updated 11 years ago
- Raspberry PI bare metal☆47Updated 11 years ago
- vAVRdisasm is an 8-bit Atmel AVR disassembler.☆75Updated 6 years ago
- Smallest possible USB compliant device with V-USB☆69Updated 10 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- Reverse Engineering work on the TP-LINK TL-WR703N 150M 802.11n Wi-Fi Router☆252Updated 5 years ago
- The EEPROM software for the WCH CH341A originally written by asbokid☆45Updated 11 months ago
- ☆22Updated 8 years ago
- USB-JTAG interface transferred from code.google.com/p/opendous-jtag