Alternatives and similar repositories for goahead

Users that are interested in goahead are comparing it to the libraries listed below

• doegox / stm32f1-firmware-extractor
  Fork of https://gitlab.zapb.de/zapb/stm32f1-firmware-extractor
  ☆84Updated 4 years ago
• screwer / IDA-scripts
  ☆49Updated 2 years ago
• tinylabs / keeloq
  Simple but slow keeloq implementation
  ☆23Updated 12 years ago
• hackocopter / SWD-Hacking
  Various projects aiming at unlocking and programming the MINI54ZAN microcontroller
  ☆17Updated 5 years ago
• Strooom / PN7150
  Library/Driver for NXP PN7150 NFC device
  ☆25Updated 11 months ago
• Gutenshit / CANBadger
  CANBadger - Hardware & Firmware Repository - An open-source automotive security research platform.
  ☆64Updated 4 years ago
• kasjer / saleae_spiflash
  SPI flash protocol analyzer for Saleae Logic
  ☆42Updated 4 years ago
• Squonk42 / TL-WR703N
  Reverse Engineering work on the TP-LINK TL-WR703N 150M 802.11n Wi-Fi Router
  ☆255Updated 5 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• OpenNuvoton / ISPTool
  NuMicro ISP programming tool & user manual
  ☆40Updated last month
• ya-jeks / gsmmux
  gsm multiplex daemon
  ☆50Updated 6 years ago
• afterhoursengineering / _CANcrusher_ARM
  Open Source CANbus hacking project.
  ☆14Updated 4 years ago
• SySS-Research / nand-dump-tools
  Simple software tools for encoding and decoding dumps of NAND memory chips using implemented error correcting codes (ECC)
  ☆89Updated 4 years ago
• cyphunk / NANDDump
  dump NAND FLASH memory chips
  ☆47Updated 9 years ago
• ffainelli / cc2530prog
  Texas Instruments CC2530 Programming tool
  ☆55Updated 11 years ago
• manux81 / canspy
  Very simple tool for users who need to interface with a device based on CAN (CAN/CANopen/J1939/NMEA2000/DeviceNet) such as motors, sensor…
  ☆55Updated 9 years ago
• stefanct / ch341eepromtool
  The EEPROM software for the WCH CH341A originally written by asbokid
  ☆50Updated last year
• linklayer / busmaster
  BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…
  ☆40Updated 5 years ago
• akacastor / xplain-glitcher
  Software for Xmega-A1 Xplained board with MAX4619 glitch circuit
  ☆40Updated 8 years ago
• HackingThings / CAN-Bus-Arduino-Tool
  A tool for performing replay and sniffing CAN bus traffic.
  ☆41Updated 5 years ago
• linklayer / cantact-pro-hw
  Hardware design files for the CANtact Pro
  ☆73Updated 5 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• deanjerkovich / avr-glitch-101
  the most basic introduction to performing a Vcc glitch attack
  ☆26Updated 8 years ago
• dword1511 / serprog-stm32vcp
  Please consider the new stm32-vserprog (https://github.com/dword1511/stm32-vserprog) project which uses libopencm3 and compiles with stan…
  ☆67Updated 9 years ago
• vdm-dev / stm32-ch340
  The firmware for STM32F103 microcontrollers that emulates CH340 IC (USB to UART interface)
  ☆27Updated 8 years ago
• NordicPlayground / nrf24lu1p-snifferdemo
  ☆33Updated 7 years ago
• pfalcon / PySWD
  Implementation of the ARM SWD (Serial Wire Debug) protocol in Python for use with low-cost development boards to manage and flash Cortex …
  ☆32Updated 10 years ago
• sogeti-esec-lab / HomePlugPWN
  HomePlugAV tools to test PLC (in)security
  ☆49Updated 6 years ago
• cvra / CAN-USB-dongle-fw
  slcan firmware for the CVRA CAN to USB dongle
  ☆37Updated 4 years ago
• esaulenka / ghidra_STM8
  Ghidra STM8 processor module
  ☆27Updated 2 months ago