zapta / linbusLinks
An Arduino based LINBUS stack and signal interceptor/injector.
☆193Updated 6 years ago
Alternatives and similar repositories for linbus
Users that are interested in linbus are comparing it to the libraries listed below
Sorting:
- The LIN protocol implemented over Arduino APIs (Serial and Digital IO)☆129Updated 4 years ago
- Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver☆115Updated 6 years ago
- ESP32 slcan compatible device☆101Updated 4 years ago
- Android CAN client☆61Updated 8 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆56Updated 4 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆71Updated 6 years ago
- CAN Bus Bridge / Smart Repeater☆37Updated 5 months ago
- A ESP32 based CAN interface for your webbrowser☆25Updated 4 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆138Updated 3 years ago
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆116Updated 11 months ago
- Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…☆324Updated last year
- ESP32 based CAN development board☆177Updated 3 years ago
- ELM327 Library for Arduino☆71Updated 5 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆103Updated 6 years ago
- Object oriented canbus library for Arduino Due compatible boards☆258Updated 3 years ago
- Volvo LIN bus reader☆94Updated 4 years ago
- ☆42Updated 5 years ago
- ESP8266 based CAN-Bus Diagnostic Tool☆43Updated 3 years ago
- LIN master node emulation with preemptive background operation☆33Updated 10 months ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆32Updated 11 months ago
- Arduino Library for CAN Bed☆27Updated 4 years ago
- Arduino CAN Bus library, MCP2515/MCP2551☆148Updated last year
- Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI☆95Updated 7 years ago
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆84Updated 10 years ago
- Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests☆66Updated last year
- An ESP32 CAN 2.0B library☆67Updated 3 months ago
- Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.☆41Updated 3 years ago
- A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.☆293Updated 5 months ago
- Arduino sketch for CAN-BUS adapter☆106Updated 9 years ago
- An Arduino sketch to read data from a CAN bus☆96Updated 6 years ago