yeokm1 / graphics-gremlin-hdmi
This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.
☆50Updated 3 months ago
Alternatives and similar repositories for graphics-gremlin-hdmi:
Users that are interested in graphics-gremlin-hdmi are comparing it to the libraries listed below
- Drop-In replacement for Dallas DS12887 RTC module☆45Updated 3 years ago
- ☆56Updated 4 years ago
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆34Updated 4 years ago
- LABS BlasterBoard files repository☆40Updated 2 years ago
- PCChips M396F V2.7 Replika☆76Updated 8 months ago
- ISA floppy disk controller card that supports up to 8 floppy drives☆68Updated last year
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆34Updated 2 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated last year
- Quadlink clone turns your ancient IBM PC into an Apple ][☆88Updated 2 years ago
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆63Updated 6 years ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆48Updated last month
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆31Updated 4 months ago
- A Sound Blaster compatible sound card for Micro Channel bus computers☆58Updated 2 years ago
- Super PC/Turbo XT BIOS☆59Updated 4 months ago
- A new ATX design of an XT compatible PC mainboard☆55Updated 4 months ago
- MFM emulator code☆56Updated 2 weeks ago
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆46Updated 8 months ago
- GIT Repo for the ATX2AT Smart Converter☆66Updated 3 years ago
- This Device allows to connect a PS/2 Mouse to your Serialport☆38Updated 4 years ago
- Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …☆38Updated last year
- A software-defined ISA card powered by a Raspberry Pi Pico☆44Updated last year
- A voltage adapter PCB for 486 CPUs☆38Updated last year
- Driver for 3COM 3C509B cards in 8-bit IBM PC/XT slots☆65Updated 3 years ago
- ISA 4Mb EMS expansion board☆32Updated 4 months ago
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆26Updated 2 years ago
- Device firmware for accessing a floppy drive at the raw flux level☆61Updated 3 months ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 7 years ago
- Gravis Ultrasound emulator on an ISA card, using bare metal on a Raspberry Pi 3/4/CM4☆57Updated 2 years ago
- CH376 on ISA card with BIOS ext☆18Updated last year
- RPi Pico based POST (Power-On Self Test) Diagnostic Card☆41Updated last week