yangjinhaoaa / OLED0.91-SSD1306-HALLinks
0.91‘OLED driver STM32 HAL
☆16Updated 3 years ago
Alternatives and similar repositories for OLED0.91-SSD1306-HAL
Users that are interested in OLED0.91-SSD1306-HAL are comparing it to the libraries listed below
Sorting:
- 基础按键处理库,实现了一般按键的单点、连点、长按检测。可进行多按键的封装,采用回调的方式与主程序通讯。☆69Updated last year
- 平衡小车☆40Updated 3 years ago
- MAX30102 module program based on STM32F103, can measure pulse and blood oxygen.☆36Updated 4 months ago
- it is a BLDC or PMSM controller☆48Updated last year
- ☆34Updated last year
- 基于STM32WB55RGV6开发板的实践项目☆22Updated 3 years ago
- FOC Learning☆50Updated last year
- Seasky_INA226☆26Updated 2 years ago
- 这是一个灵感源自WouoUI的纯C语言(C99标准),无依赖库(只需要C的标准库),适用于多种不同大小屏幕,极易部署的代码框架,可以快速构建、开发一个丝滑、Q弹的单色屏UI。☆166Updated this week
- 一款基于STM32G474的四开关Buck-Boost数字电源,支持TypeC接口PD诱骗输入和DC5.5接口输入,输入/输出最高48V10A,这是我的毕业设计,现在开源出来,含原理图、PCB、程序源码、外壳3D模型等资料。☆86Updated last year
- 包含对MAX30102的驱动,输出心率和血氧☆21Updated 5 years ago
- 基于STM32G0/STM32F0的手腕控制无按键手环☆39Updated 2 years ago
- Bits Button: Embedded key-event framework. Efficiently detects single, combined, and complex key sequences. Thread-safe ring buffer for…☆85Updated this week
- 纯C语言实现的一个按键驱动,可移植性强,支持单双击、连按、连按释放、长按;采用回调处理按键事件(自定义消抖时间),使用只需3步,1:创建按键,2:按键事件与回调处理函数链接映射。然后周期检查按键。☆17Updated 5 years ago
- 这是一个基于逐飞RT1064开源库开发的菜单框架,它能帮助你制作具备一定功能的菜单页面。☆19Updated 3 years ago
- 【开源】基于 STM32G4 自制FOC驱动板☆136Updated 3 months ago
- ☆47Updated 2 months ago
- 嵌入式按键处理驱动(Button Driver),支持单击、双击、多击、自动消抖、长按、长长按、超长按 | 低功耗支持 | 组合按键支持 | 静态/动态注册支持☆124Updated 2 weeks ago
- ☆15Updated last year
- ☆26Updated 2 years ago
- ☆47Updated last year
- ☆90Updated 2 years ago
- stm32平台的icm20602姿态解算☆12Updated 3 years ago
- 基于STM32HAL库写的常用芯片、设备驱动库☆29Updated 4 years ago
- 十八届智能车单车越野☆18Updated last year
- 使用STM32CubeM进行配置 串口+DMA+IDLE中断 实现不定长度的数据接收与发送☆32Updated 5 years ago
- 基于stm32的uart串口modbus通讯协议☆19Updated last year
- 基于STM32 HAL库的FOC封装☆110Updated last year
- VL53L0X - STM32 HAL Library☆24Updated 3 years ago
- ws2812在stm32平台上的运行代码☆26Updated 2 years ago