wiretap-retro / 2-digit-Turbo-DisplayLinks
This project is a ATTiny85-based turbo display for retro PC's. It displays 2 digits.
☆11Updated 3 years ago
Alternatives and similar repositories for 2-digit-Turbo-Display
Users that are interested in 2-digit-Turbo-Display are comparing it to the libraries listed below
Sorting:
- Gravis Ultrasound emulator on an ISA card, using bare metal on a Raspberry Pi 3/4/CM4☆58Updated 3 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆50Updated 4 years ago
- A USB keyboard adapter for the Amiga 500 based on the Pi Stamp RP2040☆16Updated 2 years ago
- POST card for troubleshooting PS/2 and Micro Channel computers☆18Updated 3 years ago
- Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga☆30Updated 3 years ago
- A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also…☆47Updated last year
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆45Updated 3 years ago
- Open Hardware Project to build a 3 in 1 cartridge based on Magic Desk☆17Updated 3 months ago
- DRAMTester for DRAM 4164 41256☆24Updated 2 years ago
- ☆19Updated 2 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆55Updated 5 months ago
- ☆40Updated 2 years ago
- Moved to SourceHut☆29Updated 6 months ago
- On Screen Display and keyboard controller for FlashFloppy☆60Updated 11 months ago
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆64Updated 10 months ago
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆17Updated last month
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆31Updated 2 years ago
- ZuluSCSI Pico - An Open Source Hardware SCSI emulator☆34Updated 2 years ago
- RPi Pico based POST (Power-On Self Test) Diagnostic Card☆50Updated 3 months ago
- Open Hardware RGB to Composite/S-Video Converter☆43Updated 4 years ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.☆55Updated 2 weeks ago
- Replace 82s126/82s129/82s131 PROMs with (E)EPROMs☆14Updated last year
- Atari 2600 PlusCart for Raspberry Pico☆20Updated 10 months ago
- Sample Arduino program to test 4164 DRAM chips.☆26Updated 4 years ago
- A small inline adapter for an ATX power supply to generate -5VDC for Retro PCs☆16Updated 3 years ago
- ☆17Updated last year
- CGA/EGA input board for the GBS-8200 VGA converter☆28Updated 4 years ago
- USB Adaptor for the Joystick and Mouse port of Commodore 64☆58Updated last week
- Yet another PCB layout of the nano SwinSID focusing on aesthetics☆15Updated 4 years ago