Alternatives and similar repositories for bluetti_mqtt

Users that are interested in bluetti_mqtt are comparing it to the libraries listed below

• mariolukas / Bluetti_ESP32_Bridge
  Bluetti Power Station ESP32 Bluetooth to MQTT Bridge
  ☆94Updated last month
• SSMCD / bluetti2mqtt
  Home Assistant Add-on for bluetti_mqtt
  ☆39Updated last year
• Patrick762 / hassio-bluetti-bt
  Bluetti Integration for Home Assistant
  ☆72Updated 3 months ago
• KinDR007 / VictronMPPT-ESPHOME
  Victron Mppt charger ve.direct to esphome node
  ☆344Updated 2 months ago
• blakadder / nspanel
  Sonoff NSPanel protocol and hacking information. Tasmota Berry driver for NSPanel
  ☆137Updated 9 months ago
• Fabian-Schmidt / esphome-victron_ble
  Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
  ☆265Updated last month
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆83Updated last week
• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆166Updated 5 months ago
• slipx06 / sunsynk-power-flow-card
  ⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.
  ☆280Updated last month
• KinDR007 / VictronSmartShunt-ESPHOME
  SmartShunt ve.direct to ESPHOME node
  ☆71Updated last year
• dmslabsbr / hoymiles
  Hoymiles ADD-ON for Home Assistant
  ☆142Updated last week
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆86Updated 2 weeks ago
• bagges / deye-esp32-bridge
  ☆50Updated last month
• lubeda / EsphoMaTrix
  A simple DIY status display with an 8x32 RGB LED panel implemented with esphome.io and Home Assistant
  ☆226Updated last year
• KlausLi / Esp-Soyosource-Controller
  Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…
  ☆159Updated last year
• tasmota / mgos32-to-tasmota32
  ESP32 Mongoose OS to Tasmota32 OTA updates for Shelly
  ☆189Updated last month
• visualapproach / WiFi-remote-for-Bestway-Lay-Z-SPA
  Hack - ESP8266 as WiFi remote control for Bestway Lay-Z spa Helsinki
  ☆321Updated 2 weeks ago
• lubeda / EspHoMaTriXv2
  A simple DIY status display with a 8x32 RGB LED matrix, implemented with esphome.io and Home Assistant.
  ☆352Updated 2 weeks ago
• nliaudat / floor-heating-controller
  esphome firmware for esp32_8ch_motor_shield
  ☆50Updated 4 months ago
• sairon / esphome-nspanel-lovelace-ui
  ESPHome component for NSPanel Lovelace UI
  ☆138Updated 9 months ago
• nliaudat / esp32_8ch_motor_shield
  An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)
  ☆102Updated last month
• Tertiush / bmspace
  Pace Battery Management System
  ☆54Updated 6 months ago
• basti242 / homeassistant_lg_therma_v_modbus
  ☆33Updated 3 months ago
• smlight-dev / slzb-06-firmware
  SLZB-06 firmware for the ESP32 main peripheral module
  ☆65Updated last year
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆55Updated last week
• dbuezas / esphome-cc1101
  ☆132Updated 11 months ago
• trucki-eu / Trucki2Shelly-Gateway
  T2SG *.bin file for a ESP8266 WEMOS D1 mini. Its purpose is to read the total power from a Shelly 3EM and send it via UART to Trucki's RS…
  ☆118Updated 11 months ago
• gabrielpc1190 / Home-Assistant_EPEver-eBox-Wifi-01-MODBUS
  How to extract data from the EPEver TRACER-AN using the eBox-Wifi-01 with Home Assistant
  ☆21Updated 4 years ago
• jomjol / AI-on-the-edge-device-docs
  Github for hosting the documentation for the project: https://github.com/jomjol/AI-on-the-edge-device
  ☆93Updated this week
• patman15 / BMS_BLE-HA
  This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.
  ☆141Updated this week