Alternatives and similar repositories for Bluetti_ESP32_Bridge

Users that are interested in Bluetti_ESP32_Bridge are comparing it to the libraries listed below

• warhammerkid / bluetti_mqtt
  MQTT interface for Bluetti power stations
  ☆173Updated last year
• KinDR007 / VictronMPPT-ESPHOME
  Victron Mppt charger ve.direct to esphome node
  ☆382Updated 3 months ago
• Fabian-Schmidt / esphome-victron_ble
  Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
  ☆345Updated this week
• patman15 / BMS_BLE-HA
  This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.
  ☆256Updated this week
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆195Updated last week
• dbuezas / esphome-cc1101
  ☆153Updated 7 months ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆194Updated last year
• thegroove / esphome-custom-component-examples
  ☆124Updated 2 years ago
• danpeig / ESP32EnergyMonitor
  Multiple phase DIY energy consumption monitor using ESP32 and ESPHome
  ☆218Updated last month
• iphong / esphome-espnow
  Direct communication between esp devices without home assistant
  ☆222Updated 5 years ago
• luar123 / zigbee_esphome
  External zigbee component
  ☆426Updated 3 weeks ago
• lubeda / EspHoMaTriXv2
  A simple DIY status display with a 8x32 RGB LED matrix, implemented with esphome.io and Home Assistant.
  ☆381Updated last week
• smlight-dev / slzb-06-firmware
  SLZB-06 firmware for the ESP32 main peripheral module
  ☆73Updated last year
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆151Updated 3 years ago
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆95Updated last month
• athom-tech / athom-configs
  Athom Technology Official Center
  ☆253Updated 3 months ago
• nliaudat / esp32_8ch_motor_shield
  An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)
  ☆110Updated 5 months ago
• tasmota / mgos32-to-tasmota32
  ESP32 Mongoose OS to Tasmota32 OTA updates for Shelly
  ☆197Updated 4 months ago
• patience4711 / read-APSystems-YC600-QS1-DS3
  Software for an esp8266 nodemcu to read data from APS inverters.
  ☆143Updated 3 months ago
• ssieb / esphome_components
  My collection of components for esphome
  ☆236Updated last week
• john30 / ebusd-esp
  Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
  ☆157Updated last year
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆95Updated last week
• SzczepanLeon / esphome-components
  ☆262Updated 3 weeks ago
• mc0110 / inetbox2mqtt
  communicate over mqtt protocol to simulate a truma inetbox
  ☆108Updated 8 months ago
• fl4p / batmon-ha
  Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK, Supervolt and other BMS via Bluetooth
  ☆435Updated this week
• wifwucite / esphome-ble-controller
  Bluetooth Low Energy (BLE) controller for ESPHome
  ☆128Updated 2 years ago
• slipx06 / Sunsynk-Home-Assistant-Dash
  Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus
  ☆185Updated 2 weeks ago
• strange-v / ha_deck
  Config-driven Home Assistant dashboard (built on top of ESPHome)
  ☆201Updated 2 months ago
• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆195Updated last year
• OpenInverterGateway / OpenInverterGateway
  Firmware replacement for Growatt ShineWiFi-S
  ☆407Updated 2 months ago