Alternatives and similar repositories for ATtiny412-I2C-Rotary-Encoder:

Users that are interested in ATtiny412-I2C-Rotary-Encoder are comparing it to the libraries listed below

• UnexpectedMaker / vacuum-stencil-box
  ☆29Updated 3 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆50Updated 2 years ago
• solderparty / flexypin_adapters_hw
  ☆43Updated this week
• wagiminator / ATtiny412-BatteryCapacityTester
  Single-Cell Li-Ion, LiPo and LiFePO4 Battery Capacity Tester
  ☆23Updated 2 years ago
• Apehaenger / Another-HotPlate-Firmware
  A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)
  ☆24Updated last year
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆108Updated 10 months ago
• Makerfabs / MaTouch-ESP32-S3-Rotary-IPS-Display-with-Touch-2.1-ST7701
  ☆35Updated last month
• Fattoresaimon / I2CEncoderMini
  ☆32Updated 4 years ago
• bytesizedengineering / mppt-charge-controller
  ☆11Updated last month
• voltlog / Voltlogger
  ☆11Updated 3 years ago
• polihedron / DIY-Reflow-Oven
  DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.
  ☆33Updated 3 years ago
• duritskiy / easyeda-MyExtensions
  A useful extension for EasyEda that creates a Menu for all your installed scripts
  ☆29Updated last year
• hxelec / s3p
  ☆81Updated 11 months ago
• RalphBacon / 230-Ultimate-Switch-Bounce-Eliminator
  Is this hardware solution the ultimate in switch bounce elimination? Simple PCB, cheap components = final solution!
  ☆13Updated 3 years ago
• wagiminator / ATtiny85-TinyCharger
  Single-Cell Li-Ion Battery Charger with Monitoring
  ☆62Updated 2 years ago
• EmanuelBender / HEX_POD
  Multi-sensor intelligent environmental Monitor
  ☆15Updated 11 months ago
• wagiminator / CH32X035-USB-PD-Adapter
  Portable Programmable Power Supply
  ☆41Updated 2 months ago
• adafruit / Adafruit_seesawPeripheral
  Arduino library for making seesaw peripherals using Arduino core!
  ☆26Updated 5 months ago
• RobTillaart / MultiSpeedI2CScanner
  Arduino I2C scanner that scans all addresses at multiple speeds.
  ☆22Updated 8 months ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• MariusHeier / magik_solder_paste_stencil_box
  Is it magik? Or is it just a 3d printed box for holding your solder stencils with automatic lifting and vacuum hold down?
  ☆33Updated 3 years ago
• wagiminator / AVR-Development-Boards
  Collection of AVR Development Boards
  ☆36Updated last year
• Fattoresaimon / ArduinoDuPPaLib
  Libraries for DuPPa products on the Arduino IDE
  ☆44Updated last year
• kapraran / FreqCountESP
  A frequency counter library for esp32
  ☆36Updated 7 months ago
• IWILZ / PicoSem
  Simple library to exchange data between the 2 cores of a Raspberry Pi Pico under Arduino IDE framework
  ☆26Updated last year
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• hamityanik / POGO-ISP-Micro
  Do you need a small ISP footprint for programming on-board AVR device? POGO ISP Micro is the right solution!
  ☆25Updated 5 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆28Updated 2 years ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆57Updated last year
• wagiminator / ATtiny85-TinyLoad
  Electronic Dummy Load
  ☆47Updated 2 years ago