Alternatives and similar repositories for reflow-controller

Users that are interested in reflow-controller are comparing it to the libraries listed below

• LKbrilliant / Solder-Paste-Dispenser
  Automated device to apply solder paste onto a PCB without using a stencil.
  ☆11Updated 4 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 11 years ago
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆113Updated last year
• c0pperdragon / HotPlate
  ☆34Updated last year
• ohararp / ReflowOven
  Repository for OSHW Reflow Oven Control
  ☆26Updated 11 years ago
• MariusHeier / magik_solder_paste_stencil_box
  Is it magik? Or is it just a 3d printed box for holding your solder stencils with automatic lifting and vacuum hold down?
  ☆34Updated 3 years ago
• ploopyco / pnp-feeder
  An automated feeder for pick and place machines.
  ☆160Updated 5 years ago
• jh1995 / KiCad-libs
  KiCad libraries for uncommon components: Nixie, VFD, early LED displays
  ☆19Updated 2 years ago
• Funkenjaeger / brd2json
  ULP for Eagle and Fusion 360 Electronics which generates a JSON representation of the board
  ☆36Updated last year
• borgel / bolton_buttons
  Small devices to add keys to devices that have too few
  ☆13Updated 6 years ago
• L-souhaiel / C-Raspi-Pico-PIO-CANBus
  ☆12Updated 3 years ago
• oceanofthelost / InteractivePCB
  interactive PCB viewer
  ☆70Updated 2 years ago
• UnexpectedMaker / SAMD21G-Mangler
  SAMD21G Mangler Design Files
  ☆12Updated 5 years ago
• MichMich / KiCad-SSD1306_OLED-0.91-128x32
  Kicad Library Files for an 0.91" 128x32 OLED Display
  ☆45Updated last week
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• MangyDogUK / ReflowOven
  The source code for my reflow oven, WARNING use at your own risk. This project deals with MAINS VOLTAGES which can kill.
  ☆23Updated 5 years ago
• wntrblm / jellyfish-and-starfish
  ☆109Updated 2 years ago
• rocketscream / TinyReflowController
  An all-in-one Arduino compatible reflow controller powered by ATtiny1634R
  ☆129Updated 4 years ago
• adafruit / RP2040-Based-Tester-Brains-PCB
  PCB files for the Adafruit RP2040 Based Tester Brains
  ☆15Updated 2 years ago
• makermoekoe / StencilJig3D
  A fully 3D printable stencil printer jig for manual solder paste applying
  ☆37Updated last year
• sirboard / BreakoutBoards
  SMD to THT Breadboard Adapter PCB's for QFN, TQFP, LQFP, SOIC, SSOP, TSSOP, MSSOP and VSSOP.
  ☆46Updated 3 years ago
• Mortezix / pnpfeeder
  Pick and place 3d printable feeder
  ☆18Updated 8 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• xpDIY / 3DPlacer
  The repo contains the design for converting the 3d printer to pick and place machine
  ☆39Updated 6 months ago
• luni64 / MicroMod_3.2
  NXP MK20DX256 board for the Sparkfun MicroMod system. Should be able to run Teensy 3.2 firmware
  ☆16Updated 4 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆44Updated 3 years ago
• Apehaenger / Another-HotPlate-Firmware
  A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)
  ☆27Updated 7 months ago
• tjko / tiny-picoprobe
  Tiny PicoProbe PCB
  ☆22Updated 2 years ago
• jfedor2 / magellan-spacemouse
  Adapter to use RS-232 Magellan/SpaceMouse with modern software
  ☆47Updated 5 months ago
• akshaybaweja / component-tester-oled
  Component Tester in a Keychain
  ☆75Updated 3 years ago