Alternatives and similar repositories for Raspberry-GadgetFS

Users that are interested in Raspberry-GadgetFS are comparing it to the libraries listed below

• darrylburke / RaspberryPiZero_HID_MultiTool
  Scripts for turning a RaspBerryPi zero into multiple HID devices including, Serial, Ethernet, Storage, HID Keyboard
  ☆66Updated 8 years ago
• stjeong / USBIP-Virtual-USB-Device
  Emulates USB Devices using USBIP in Python or c
  ☆16Updated 5 years ago
• evilwombat / gopro-usb-tools
  Tools for booting an otherwise hard-bricked GoPro Hero2 / Hero3+Black / Hero4 camera using its built-in USB command mode, to its RTOS or …
  ☆138Updated 7 years ago
• matprophet / subduino
  Arduino project for Subaru SSM to Can-bus conversion
  ☆14Updated 4 years ago
• rpkish / Subduino-SSM
  Subaru Select Monitor to Canbus adapter
  ☆28Updated 7 years ago
• gsmrana / USB-HID-Analyzer
  A Windows utility tool for analyzing USB HID class devices
  ☆21Updated 5 years ago
• calvincestari / ecuExplorer
  An open-source application for the Subaru ECU.
  ☆34Updated 6 years ago
• jcmnn / j2534-rs
  A J2534 interface for rust
  ☆19Updated 3 years ago
• nh2 / arduino-a7105
  Fixed code from http://www.instructables.com/id/Easy-Android-controllable-PC-Interfaceable-Relati/step6/Arduino-Software/
  ☆24Updated 11 years ago
• src0x / LibSSM2
  This C# library provides Subaru specific car diagnostic protocol messages. Reasonable new cars only, old cars use SSM1.
  ☆25Updated 15 years ago
• smulikHakipod / USB-Emulation
  Emulates USB Devices In Python
  ☆221Updated 11 years ago
• djpnewton / busdog
  busdog is a filter driver for MS Windows (XP and above) to sniff USB traffic.
  ☆192Updated 10 years ago
• sparkfun / OBD-II_UART
  A board that provides a serial interface with a vehicle's OBD-II bus.
  ☆82Updated 5 years ago
• watterott / ESP-WROOM-Breakout
  Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)
  ☆35Updated 6 years ago
• blegas78 / usb-sniffify
  Raspberry Pi 4 USB Forwarder, Sniffer, Injector
  ☆68Updated 3 years ago
• yeokm1 / reverse-engineering-ndp2016-wristband
  Schematics of the reverse engineered Pixmob wristband used in NDP2016. Sample IR brute-force code is available but has not been fully tes…
  ☆28Updated 9 years ago
• evilwombat / gopro-fw-tools
  Unofficial firmware tools for my favorite sports camera(s).
  ☆67Updated 9 years ago
• OriKuttner / ftdi-i2c
  I2C communication for FTDI chips using free libftdi
  ☆14Updated 9 years ago
• NZSmartie / PyHIDParser
  A HID descriptor parser written in Python 3
  ☆24Updated 6 years ago
• Merp / SubaruDefs
  Subaru ECU Definitions
  ☆111Updated 2 years ago
• carloop / app-vin-reader
  VIN reader
  ☆14Updated 8 years ago
• realthunder / usbip
  Fork of usb/ip from linux kernel. Adding support of filters for application layer acceleration.
  ☆58Updated 11 years ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆82Updated 4 years ago
• collin80 / OBD2Scan
  Sketch to scan OBDII with an M2
  ☆12Updated 4 years ago
• ueno / libusb-gadget
  Simple wrapper library to access Linux USB GadgetFS
  ☆49Updated 16 years ago
• jnk0le / RFM7x-lib
  library for ones of the worst of chinese nRF24l01+ "alternatives"
  ☆70Updated last year
• martyrs / cc1101-ook
  OOK tx example for TI CC1101 with arduino
  ☆36Updated 3 years ago
• frazew / PythonUSBIP
  USBIP protocol fully implemented in python + Full wiimote support using cwiid
  ☆76Updated 6 years ago
• LegacyNsfw / 12593358
  Reverse engineering GM's powertrain control module software from my Corvette
  ☆11Updated 5 years ago
• trust1995 / Ghidra_TELink_TC32
  Ghidra processor specification for the Telink TC32
  ☆18Updated 6 years ago