Alternatives and similar repositories for rootfs

Users that are interested in rootfs are comparing it to the libraries listed below

• zuckschwerdt / rtl_433_relay
  Some example readers/relays for rtl_433 JSON UDP data.
  ☆14Updated 5 years ago
• oWCTejLVlFyNztcBnOoh / gr-wmbus
  Receiver for wireless m-bus (EN 13757-4) based on the rtl-sdr
  ☆27Updated 9 years ago
• azrdev / rtl433_influx
  dump everything your rtl-sdr receives on 433MHz into an InfluxDB for easy graphing -- superseded by `rtl433 -F influx`
  ☆31Updated 5 years ago
• texane / nrf
  nordic semiconductor wireless chipsets related code
  ☆43Updated 11 years ago
• bablokb / raspi2go
  Raspberry Zero as multi-gadget USB-stick
  ☆15Updated 4 years ago
• jetpilot305 / Rothult-Arduino
  Arduino code to repurpose Ikea Rothult lock for serial control
  ☆17Updated 5 years ago
• pilight / pilight_firmware
  Prefilter for 433 MHz remotes (and similar protocolls) written for an attiny45
  ☆19Updated 10 years ago
• ab77 / beastcraft-telemetry
  Santak IPV-2012C UPS, DS18B20 one-wire temperature, ZTE MF823 hostless modem + A5-V11 (MiFi) router and U-blox7 USB GPS monitoring with G…
  ☆22Updated 8 years ago
• dimhoff / ser4010
  UART controllable SI4010 based tunable OOK/FSK RF transmitter
  ☆24Updated 6 years ago
• neo7530 / keeloqduino
  KeeLoQ compatible Transmitter using ATTiny85
  ☆13Updated last year
• flatsiedatsie / 433Switches
  Clone 433Mhz signals - A python plugin for domoticz
  ☆19Updated last year
• mini-box / openups2
  MiniBox OpenUPS2
  ☆38Updated 4 years ago
• SensorsIot / Hacking-433
  ☆28Updated 7 years ago
• jcrona / rf-ctrl
  A command-line tool to control 433MHz OOK based devices
  ☆41Updated 6 years ago
• bvarner / PZCT-02-BurdenShift
  Resistive burden & level shift to convert PZCT-02 Split-core Current Transformer output to ADC input voltages.
  ☆13Updated 5 years ago
• solarkennedy / equail
  A plush toy activated by Bluetooth Low Energy beacons
  ☆27Updated 6 years ago
• jorgecis / Remotsy
  Examples of how to create a custom firmware for the remosty boards.
  ☆25Updated 6 years ago
• homewsn / whsniff
  Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …
  ☆136Updated 11 months ago
• kodarn / Sparsnas
  Various projects on the IKEA Sparsnäs/Sparsnas energy monitor
  ☆48Updated 7 years ago
• dreamcat4 / lgremote
  A command line program to remotely control 2011 LG "Smart" TVs.
  ☆36Updated 11 years ago
• henryk / milight-reverse-engineering
  Tools that were used in the reverse engineering of the Mi-Light 2.4GHz LED light control protocol
  ☆42Updated 10 years ago
• p2baron / x10rf
  Energia Library for sending x10 messages by RF
  ☆14Updated 8 years ago
• rokrodic / Xiaomi_Yi_Remote
  Xiaomi Yi, Yi 4k, Yi 4k+ Arduino ESP8266 wifi remote controller
  ☆14Updated 6 years ago
• RamiroPareja / Osomcom-Pocsag
  Simple and cheap POCSAG transmitter
  ☆13Updated 11 years ago
• xoseperez / rf-tools
  Scripts to interface RF tools like the RF Explorer or the Power Meter 8000
  ☆14Updated 7 months ago
• pothosware / SoapyMultiSDR
  Multi-device support module for SoapySDR
  ☆13Updated 2 years ago
• ElectronicCats / CatWAN_USB_Stick
  An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
  ☆43Updated last month
• BehindTheSciences / record-an-RF-signal-with-GNURadio-and-transmit-it-using-a-CC1101
  Code to record an RF signal with GNURadio (Windows) and transmit it using a CC1101 (Raspbian)
  ☆24Updated 6 years ago
• LooUQ / Arduino-LoRa-Sniffer
  Allows you to use an Arduino to capture LoRa radio network traffic and transfer to a PC for viewing or saving to disk.
  ☆62Updated 8 years ago
• tandersson / rf-bitbanger
  Simple tools for handling OOK (on-off-keyed) RF transmission/reception on ISM bands
  ☆35Updated 11 years ago