Alternatives and similar repositories for posy_design_into_real_display

Users that are interested in posy_design_into_real_display are comparing it to the libraries listed below

• cnlohr / oledscope
  Playing around with a 128x128 OLED module
  ☆31Updated last year
• timonsku / Touchpad-Generator
  Generates a 2D touchpad / trackpad XY pattern and creates a fully routed PCB out of it
  ☆56Updated 9 months ago
• CarlBugeja / PCB-Hot-Plate
  Reflowing PCBs with PCBs!
  ☆88Updated 3 years ago
• bitbank2 / bb_epaper
  A frustration-free library for working with all 24-pin eink panels
  ☆105Updated last week
• cnlohr / ch32v003_3digit_lcd_usb
  ch32v003 USB Driver for 3-digit 7-segment TN LCDs with touch
  ☆201Updated last year
• splitbrain / pinoutleaf
  Create printable pinout diagrams
  ☆150Updated 4 months ago
• shraiwi / ATTiny555
  A 555 timer simulator running on the ATTiny85 :)
  ☆63Updated 3 years ago
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆35Updated last year
• dupontgu / scopin-sans-typeface
  Fully generated typeface that makes text look like it is being viewed as serial data on an oscilloscope
  ☆72Updated 2 years ago
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• bbenchoff / Dumb-Badge
  A portable dumb terminal
  ☆54Updated 3 years ago
• mitxela / badge
  ☆85Updated last year
• mitxela / clock4
  ☆95Updated 2 months ago
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆65Updated 7 months ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆58Updated 2 years ago
• jjsch-dev / DoorController
  ☆18Updated 11 months ago
• solderparty / rp2xxx_stamp_footprints
  ☆81Updated 11 months ago
• ripred / CPUVolt
  Library for Arduino and ATmega series processors to read the processor's Vcc voltage and percentage of capacity (for battery based projec…
  ☆79Updated 11 months ago
• jonny12375 / rp3a0
  Reverse engineering the RP3A0 SoC from the Raspberry Pi Zero 2W
  ☆200Updated 4 months ago
• bitluni / luniASM
  ☆65Updated last year
• gfcwfzkm / PIF-Image-Format
  Image format, tools & librares for limited embedded systems
  ☆86Updated 2 years ago
• Matthias-Wandel / caliper-interface
  Connecting cheap digital calipers to Raspberry Pi and decode readings
  ☆123Updated 9 months ago
• Inne-Lemstra / soft_soldering_jig
  Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them…
  ☆20Updated 5 years ago
• gabrielguerrer / rng_rava
  RAVA: an Open Hardware True Random Number Generator based on Avalanche Noise
  ☆82Updated last year
• bitluni / MagnetMatrix
  ☆64Updated last year
• nonik0 / Light-Rail
  ☆77Updated 6 months ago
• bitluni / LaserCRT
  ☆85Updated last year
• upiir / diy_led_ring_light_arduino
  DIY 32 SMD 0402 LED Ring Light for Potentiometers and Rotary Encoders
  ☆35Updated last year
• mitxela / PrecisionClockMkII
  ☆87Updated last year
• sabogalc / KiCad-Arduino-Boards
  A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
  ☆68Updated last year