Alternatives and similar repositories for m16c-flasher:

Users that are interested in m16c-flasher are comparing it to the libraries listed below

• silverchris / m16c
  ☆14Updated last year
• JohannesObermaier / f103-analysis
  ☆96Updated 3 years ago
• ChristianIvarsson / bdmtoy
  ☆9Updated last year
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 3 weeks ago
• mackelec / meCAN
  CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4
  ☆24Updated 2 years ago
• GMMan / st-link-hack
  An exploration into unsafely written code
  ☆71Updated last year
• 5inf / uprog2
  uprog2: Universal Programmer for Linux
  ☆16Updated last year
• kolyandex / CAN-to-USB-lawicel-for-stm32
  CAN to USB adapter using Lawicel/Canhacker protocol.
  ☆23Updated 5 years ago
• titos-carrasco / DSO5102P-Python
  Access to the Hantek DSO5102P oscilloscope from Python
  ☆25Updated last year
• jbtronics / DS1054_BodePlotter
  A Python program that plots Bode diagrams of a component using a Rigol DS1054Z and a JDS6600
  ☆36Updated 4 years ago
• rhysmorgan134 / SocketMost
  ☆17Updated 3 months ago
• lujji / st-decrypt
  Utility for encrypting/decrypting ST-Link firmware images
  ☆115Updated 8 years ago
• msalau / rl78flash
  Tool to program RL78 MCUs via serial bootloader
  ☆71Updated last year
• mackelec / STM32F105_Dual_CAN_Board
  ☆10Updated 4 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆64Updated 2 months ago
• xobs / blackmagic-espidf
  Blackmagic Wireless SWD Debug probe hosted on esp-idf SDK (for ESP32) with UART on Telnet port and HTTP using xterm.js
  ☆37Updated 2 years ago
• slimelec / ollie-hw
  ☆70Updated 3 years ago
• djwlindenaar / Hella_Turbo_Controller
  Programming the Hella Universal turbo actuator
  ☆12Updated 4 years ago
• zeldin / fx3lafw
  Blob-free logic analyzer firmware for FX3
  ☆80Updated last year
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆57Updated 2 months ago
• WeActStudio / WeActStudio.STM32G474CoreBoard
  ☆22Updated 9 months ago
• doegox / stm32f1-firmware-extractor
  Fork of https://gitlab.zapb.de/zapb/stm32f1-firmware-extractor
  ☆84Updated 3 years ago
• m3y54m / cjmcu-ft232hq-programmer
  FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)
  ☆29Updated last year
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆24Updated 5 years ago
• goopypanther / OpenFieldProbe
  EMC near-field probe designs
  ☆32Updated 4 years ago
• linklayer / gs_usb_fd
  ☆14Updated 3 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆37Updated 11 months ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆69Updated 6 years ago
• mck1117 / proteus
  ☆39Updated 2 months ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆49Updated last month