sylvainf / stm32-ecg
A low cost medical monitoring system with ECG and Pulse oximeter for fun or educational use
☆14Updated 6 years ago
Alternatives and similar repositories for stm32-ecg:
Users that are interested in stm32-ecg are comparing it to the libraries listed below
- examples for programming Analog Devices ADF4350☆11Updated 2 years ago
- Turning cheap(ish) Pluto-SDR receivers into passive radar sensors☆17Updated 10 months ago
- A $50 DIY RF network analyzer with tracking generator and RTL-SDRs.☆17Updated 4 years ago
- FreeSRP Hardware☆21Updated 7 years ago
- FPGA firmware for FPGA radio baseband board. Scroll down for README.☆16Updated 5 years ago
- RF Signal Generator with filtered outputs, modulation features☆14Updated 4 years ago
- 12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.☆15Updated 3 years ago
- USB RF Signal Generator / Spectrum Analyzer☆21Updated 2 years ago
- 25MHz to 1.25GHz Vector Network Analyser☆23Updated 5 years ago
- Time to Digital Converter (TDC)☆30Updated 4 years ago
- LWDO-SDR - experimental LF/VLF SDR timing receiver☆12Updated 2 years ago
- ERASynth Documentation☆18Updated 5 years ago
- easy to use RX and TX handler for the Adalm - Pluto☆15Updated 3 years ago
- Hands on labs for the ADALM Pluto SDR☆64Updated 3 years ago
- 24-bit, 4-kSPS, 12-ch delta-sigma ADC with PGA and voltage reference for sensor measurement☆15Updated 3 years ago
- RF and Microwave Engineering Scikit☆12Updated this week
- GitHub Repository for iotSDR open source material☆34Updated last year
- STM32: example of usage of R820T2 tuner☆16Updated 6 years ago
- openEMS High-level layer☆18Updated last month
- RF power detector board design files☆16Updated 8 years ago
- 10 MHz 3 channel distribution amplifier and low pass filter designed to integrate in a BG7TBL GPSDO☆10Updated 3 years ago
- A current mode buck converter on the SKY130 PDK☆27Updated 3 years ago
- GeophoneDuino is a small node able to sample a geophone through an SPI-enabled MCP3201 ADC and transmit the data back to a server over Wi…☆10Updated 6 years ago
- This repository contains software for Infineon's 24GHz Radar boards for Arduino.☆19Updated 5 years ago
- RF and Microwave design projects using ADS, HFSS, and other tools☆20Updated 4 years ago
- MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor☆45Updated 4 years ago
- Raw LoRa test signal samples for the gr-lora project.☆18Updated 8 years ago
- Yet Another XC7Z010 Board☆17Updated 3 years ago
- Making Lattice SensAI work properly on tinyVision products☆12Updated 2 years ago
- Hairpin filter generator and openEMS model.☆20Updated 4 years ago