sparkfun / SparkFun_IridiumSBD_I2C_Arduino_LibraryLinks
An Arduino library to support Short Burst Data communication using the Iridium 9602 and 9603N over both Serial and I2C
☆16Updated last year
Alternatives and similar repositories for SparkFun_IridiumSBD_I2C_Arduino_Library
Users that are interested in SparkFun_IridiumSBD_I2C_Arduino_Library are comparing it to the libraries listed below
Sorting:
- An Arduino library to enable communications with the Swarm M138 satellite modem☆28Updated 2 years ago
- Arduino library for RockBLOCK Iridium satellite modem (http://rock7mobile.com)☆136Updated 10 months ago
- A global satellite tracker utilising the SparkFun Artemis module, Iridium 9603N satellite transceiver and u-blox ZOE-M8Q GNSS☆15Updated 3 years ago
- A drop-in solution for interactions on the Iridium Satellite network using AT commands. The library uses the ESP32 UART bus with differen…☆9Updated last week
- An Arduino library for the u-blox SARA-R5 LTE-M / NB-IoT modules with secure cloud☆15Updated 5 months ago
- LNA with filter for 400-440 MHz (UHF for amateur satellites)☆31Updated 3 years ago
- The OpenLog Artemis GNSS Logger makes logging raw UBX messages as easy as controlling text menus! This is a special add-on to the OpenLog…☆13Updated 7 months ago
- Arduino library for the ADF4351 PLL Frequency Synthesizer chip☆48Updated 3 years ago
- AX5043 Based USB Radio, dual band UHF and VHF☆31Updated 2 years ago
- Complete stand-alone WSPR2 transmitter using ESP32 + Si5351 modules. Uses SNTP for transmit time-sync☆28Updated last year
- This project will have the files for a Cube Sat Telemetry system Using Raspberry Pi Transmitter Board☆18Updated 7 years ago
- ESP32-based LoRa ground station☆31Updated 4 years ago
- Processor module for CubeSat satellites, developed primarily for the ArduSat-X and ArduSat-1 missions☆15Updated 5 years ago
- DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files☆13Updated 4 years ago
- Software for OreSat's GPS receiver☆19Updated 2 weeks ago
- Symbols and Footprints for CadSoft Eagle☆29Updated 6 years ago
- u-blox GNSS receiver library light weight for low power tracking application☆26Updated 5 years ago
- 📡 Demodulator and decoder for the Orbcomm VHF Subscriber Transmitter (STX) downlink.☆15Updated 5 years ago
- Vaisala Radiosonde Telemetry Receiver☆16Updated 3 years ago
- University Class Open Ground Station Hardware☆28Updated last year
- EPS Hardware for UPSat☆11Updated 6 years ago
- A lightweight APRS tracker and digipeater☆34Updated 5 years ago
- Driver for Adafruit's Si5351 Clockgen Breakout☆45Updated last year
- A simple to use radio modem for long distances using LoRa.☆20Updated last year
- Trackuino firmware source code☆10Updated 6 years ago
- C3 (Command, Communication, and Control) our Command and Data Handling (C&DH) card.☆21Updated last year
- Documentation and firmware for the SparkFun DataLogger IoT line of products.☆20Updated 6 months ago
- Payload board schematic and footprint for the SUCHAI 2 and 3.☆14Updated 2 years ago
- AMSAT Fox-1 satellite Maximum Power Point Tracker hardware design files☆61Updated 3 years ago
- ☆19Updated last year