Alternatives and similar repositories for ESP32_LaserBox_E

Users that are interested in ESP32_LaserBox_E are comparing it to the libraries listed below

• gjkrediet / Fluid-controller
  A wireless battery powered pendant for FluidNC based on esp32
  ☆18Updated last year
• mstrens / grbl_controller_stm32
  Grbl controller running on stm32F103
  ☆37Updated 6 years ago
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆212Updated 5 years ago
• makerbase-mks / MKS-DLC32-FIRMWARE
  The source code of MKS DLC32
  ☆93Updated last year
• Schildkroet / Candle2
  GRBL control interface in Qt.
  ☆221Updated 6 months ago
• mstrens / grbl_6axis_on_stm32
  grbl_6axis_on_stm32
  ☆59Updated 5 years ago
• makerbase-mks / MKS-StepStick-Driver
  Include MKS TMC2209, MKS TMC2225, MKS TMC2208, MKS TB67S109 and so on
  ☆67Updated 2 years ago
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆299Updated last year
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆257Updated 2 months ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆82Updated 3 years ago
• dabit20 / dabitusb_cnc
  ☆10Updated 5 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆80Updated last year
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆197Updated 2 years ago
• jarekkt / step2mach
  Plugin for Mach3 and Nucleo-F429ZI board
  ☆17Updated 5 years ago
• Lenbok / NoLash
  ☆13Updated 12 years ago
• AC8L / FluidNC-Pendant
  Pendant for FluidNC-powered devices over Wi-Fi using Websockets
  ☆25Updated 2 years ago
• grblHAL / STM32F4xx
  grblHAL driver for ST STM32F4xx (Nucleo-64, Blackpill)
  ☆120Updated last week
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆230Updated last year
• zeevy / grblcontroller
  Compact android mobile application for gcode streaming and controlling a cnc machine with grbl firmware
  ☆215Updated last year
• thomast777 / grbl32
  GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
  ☆210Updated 5 years ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆105Updated this week
• makerbase-mks / MKS-DLC32
  MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equ…
  ☆383Updated 7 months ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆22Updated 3 years ago
• perivar / grbl-Mega-5X
  5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C tha…
  ☆25Updated 4 years ago
• michmela44 / ESP3D-WEBUI
  A Web UI for ESP8266 or ESP32 based boards connected to 3D printers / CNC
  ☆22Updated 2 months ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆176Updated 3 years ago
• makerbase-mks / Datasheet
  ☆72Updated 4 years ago
• futurelink / linuxcnc-spindle-encoder
  A small AVR controller and a component to connect high precision encoder to LinuxCNC via Modbus RTU
  ☆18Updated 5 years ago
• makerbase-mks / MKS-Robin
  MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens.…
  ☆134Updated 3 years ago
• usbcnc / grbl
  This is a port of GRBL 1.1 to STM32F103 target
  ☆212Updated 6 years ago