Alternatives and similar repositories for grbl-Mega-5X

Users that are interested in grbl-Mega-5X are comparing it to the libraries listed below

• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆81Updated last year
• terjeio / grblHAL
  This repo has moved to a new home https://github.com/grblHAL
  ☆230Updated last year
• bdring / 6-Pack_CNC_Controller
  ☆320Updated 2 years ago
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆218Updated 5 years ago
• terjeio / GRBL_MPG_DRO_BoosterPack
  Tiva C BoosterPack for GRBL MPG/DRO
  ☆47Updated 9 months ago
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆202Updated 2 years ago
• Schildkroet / Candle2
  GRBL control interface in Qt.
  ☆224Updated last month
• bdurbrow / grbl-Mega
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆35Updated 4 years ago
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆298Updated last year
• gnea / grbl-LPC
  ☆76Updated 3 years ago
• terjeio / ioSender
  A GCode Sender for Grbl and grblHAL written in C# (Windows only).
  ☆263Updated last month
• thomast777 / grbl32
  GRBL 1.1f CNC Controller forked/ported to STM32 ARM : STM32F103 and STM32F407
  ☆215Updated 5 years ago
• Paciente8159 / uCNC
  µCNC - Universal CNC firmware for microcontrollers
  ☆403Updated 2 weeks ago
• bdring / 4_Axis_SPI_CNC
  4 Axis CNC Controller for Grbl_ESP32
  ☆68Updated 5 years ago
• grblHAL / core
  grblHAL core code and master Wiki
  ☆445Updated 2 weeks ago
• fra589 / grbl-Mega-5X
  5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C tha…
  ☆376Updated last year
• cguerrero1205 / LCD_GRBL
  Offline controller for CNC with GRBL 1.1
  ☆72Updated 4 years ago
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆55Updated 2 weeks ago
• makerbase-mks / MKS-DLC
  MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and …
  ☆103Updated 3 years ago
• makerbase-mks / MKS-DLC32
  MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equ…
  ☆415Updated 3 months ago
• LETARTARE / grblQ-Mega-4axes
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆34Updated 5 years ago
• ChrisWag91 / PI-LCNC
  Adapter board to use a Raspberry Pi as a Linux CNC controller
  ☆59Updated 3 years ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆125Updated last month
• cprezzi / grbl-LPC
  Multiple compiled versions for different boards & machines (under releases)
  ☆57Updated 3 years ago
• BCN3D / BCN3DSigma-Electronics
  6 Axis Open Source Electronics for BCN3D Sigma 3D Printer.
  ☆55Updated 4 years ago
• grblHAL / drivers
  Driver overview
  ☆38Updated 3 weeks ago
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆118Updated 2 weeks ago
• zeevy / grblcontroller
  Compact android mobile application for gcode streaming and controlling a cnc machine with grbl firmware
  ☆215Updated last year
• adgaudio / dlp_printer
  Complete designs for a completely custom built Laser-SLA 3D printer. My own Mechanical Designs, Firmware, and Software.
  ☆31Updated 10 years ago
• makerbase-mks / MKS-SBASE
  MKS SBASE is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864 and MKS TFT T…
  ☆160Updated 3 years ago