sodnpoo / fernlyLinks
Fernvale research OS
☆25Updated 9 years ago
Alternatives and similar repositories for fernly
Users that are interested in fernly are comparing it to the libraries listed below
Sorting:
- Dump NOR/Parallel FLASH memory chips using an Arduino or Raspberry Pi☆45Updated 7 years ago
- dump NAND FLASH memory chips☆49Updated 9 years ago
- Fernvale research OS☆150Updated 9 years ago
- NuttX port to Fernvale platform☆26Updated 9 years ago
- vAVRdisasm is an 8-bit Atmel AVR disassembler.☆79Updated 6 years ago
- PCB Reverse Engineering tool☆72Updated 9 years ago
- USB reverse engineering utils (capture / replay / e.t.c.)☆51Updated 2 years ago
- Integrated Circuit (IC) Reverse Engineering (RE) software. Rough cuts for R&D.☆60Updated 4 years ago
- Tools for updating and dumping firmware from GPS receivers utilizing the MT3333 or MT3339 chipset☆32Updated 8 years ago
- Raspberry PI bare metal☆48Updated 11 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆153Updated 7 years ago
- ESP8266 wifi packet injection and receiving experiment☆105Updated 8 years ago
- ☆23Updated 8 years ago
- Code pointed at by my blog☆18Updated 12 years ago
- USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad☆21Updated 12 years ago
- When you are presented with pins that you suspect provide Serial but you do not have access to the documentation. Connect your Arduino …☆92Updated 6 years ago
- CFE backup tool.☆34Updated 2 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- CANBadger - Hardware & Firmware Repository - An open-source automotive security research platform.☆64Updated 4 years ago
- Fully modular opensource firmware for the eZ430 chronos using TI's new msp430-elf-gcc☆59Updated 6 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆114Updated 11 years ago
- Wget like tool to dump seagate memory and buffer☆68Updated 3 years ago
- This is the code for the fault injection tutorial I wrote. Read the README for more information.☆13Updated 11 years ago
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- A command-line tool to control 433MHz OOK based devices☆42Updated 6 years ago
- Migrated to Codeberg☆83Updated 3 years ago
- PL2303HX Userspace GPIO control tool☆35Updated 5 years ago
- Source code for the HorrorScope and material for the ScaCheapier workshop☆25Updated 5 years ago
- Reverse Engineering work on the TP-LINK TL-WR703N 150M 802.11n Wi-Fi Router☆256Updated 5 years ago
- ☆22Updated 9 years ago