schlae / PS2FloppyAdapter
Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors
☆34Updated 4 years ago
Alternatives and similar repositories for PS2FloppyAdapter:
Users that are interested in PS2FloppyAdapter are comparing it to the libraries listed below
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆63Updated 6 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆43Updated 3 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated last year
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆29Updated 3 months ago
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆26Updated 2 years ago
- 8088-compatible 8-bit ISA PC/104 SVGA Card☆25Updated 5 years ago
- Attempt to reverse-engineer a Proton PT8010AF based Turbo XT motherboard☆20Updated 3 years ago
- ISA 4Mb EMS expansion board☆30Updated 2 months ago
- A Turbo circuit with a MHz display that can slow down the CPU speed☆28Updated 3 weeks ago
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆33Updated 2 years ago
- Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …☆36Updated last year
- A passive board for connceting more floppy drives to a controller with manual id switching☆29Updated 2 years ago
- MFM emulator code☆54Updated last month
- Device firmware for accessing a floppy drive at the raw flux level☆58Updated 2 months ago
- Use USB Keyboards, Mice and Joysticks on PC/XT, PC/AT, Tandy 1000, Atari, Amiga, C64 and Apple☆23Updated 2 years ago
- Driver for 3COM 3C509B cards in 8-bit IBM PC/XT slots☆63Updated 3 years ago
- A voltage adapter PCB for 486 CPUs☆37Updated last year
- ☆18Updated 2 years ago
- CMS Logic Scheme for Sound Blaster 2.0☆39Updated last year
- Modified OpenFlops specifically to replace Citizen W1D drives☆14Updated 2 months ago
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆49Updated last month
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆46Updated 6 months ago
- RGBS converter for MDA, Hercules, CGA and EGA☆108Updated last week
- This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).☆22Updated last year
- ISA 8bit EMS 2Mb expansion card☆20Updated 2 years ago
- GIT Repo for the ATX2AT Smart Converter☆64Updated 3 years ago
- Tutorial on the IBM Micro Channel bus architecture☆35Updated 3 years ago
- A 16MB 30 pin SIMM☆39Updated 2 years ago
- A replica of the TD-37S 7-segment display used in PCs from the 90s☆25Updated 11 months ago
- ☆55Updated 4 years ago