rigred / kicad-retro
Collection of KiCad symbols and Footprints for retro hardware
☆14Updated 2 years ago
Alternatives and similar repositories for kicad-retro:
Users that are interested in kicad-retro are comparing it to the libraries listed below
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated last year
- A 16MB 30 pin SIMM☆39Updated 2 years ago
- Adapter for mounting a PC104 module onto an ISA card (for use with a 16bit backplane)☆12Updated last year
- 8088-compatible 8-bit ISA PC/104 SVGA Card☆25Updated 5 years ago
- ☆18Updated 2 years ago
- This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).☆23Updated last year
- A board outline and pad connections for 72-pin SIMM memory.☆24Updated 2 years ago
- Reverse engineered schematic of the Orchid Tiny Turbo 286☆25Updated 3 years ago
- AdLib clone. Based on schlae's PCB, with some modifications.☆19Updated 6 years ago
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆26Updated 2 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆45Updated 3 years ago
- POST card for troubleshooting PS/2 and Micro Channel computers☆16Updated 2 years ago
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆34Updated 4 years ago
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆63Updated 6 years ago
- ISA card to provide up to two writeable option-ROM sockets.☆14Updated 5 years ago
- ISA 8bit EMS 2Mb expansion card☆20Updated 2 years ago
- Repair info and schematics for mostly older MFM hard drives☆30Updated 2 months ago
- ISA 4Mb EMS expansion board☆32Updated 4 months ago
- A 68000 socketed ITX form factor Minimig.☆20Updated 3 months ago
- ZuluSCSI Pico - An Open Source Hardware SCSI emulator☆29Updated last year
- Attempt to reverse-engineer a Proton PT8010AF based Turbo XT motherboard☆20Updated 3 years ago
- IBM Colour Graphics Adapter schematics redrawn in KiCad☆23Updated last year
- An FPGA-based disk controller card for the Apple II☆45Updated 6 years ago
- A One 286 Replika☆15Updated 4 months ago
- A voltage adapter PCB for 486 CPUs☆38Updated last year
- PAL brute forcing using closed loop feedback w/ open-tl866☆24Updated 3 years ago
- Raspberry Pi to ISA bus, including Adlib emulation and PCB (KiCad)☆42Updated last year
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆46Updated 8 months ago
- Miniature 8-bit ISA CompactFlash Interface + Boot ROM☆16Updated 6 years ago
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆50Updated 3 months ago