sawaiz / splitFlapDisplay
Low cost and easy to assemble Split flap display.
☆12Updated 7 years ago
Alternatives and similar repositories for splitFlapDisplay:
Users that are interested in splitFlapDisplay are comparing it to the libraries listed below
- ☆10Updated 2 years ago
- Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).☆40Updated 2 years ago
- A library to drive 32 WS28XX streams simultaneously from a Teensy 4.0☆90Updated 5 years ago
- ☆19Updated last year
- Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net☆33Updated 7 years ago
- Lumos is a Python library for working with DMX512 lighting control signals sent over ethernet.☆20Updated 9 years ago
- Automatically generates XYmap function for irregular/gapped LED arrays.☆70Updated 7 years ago
- Small PCB color samples to be used when designing printed circuit boards☆21Updated 5 years ago
- A hardware based animation library,pixel driver & dynamic led mapping system for addressable LEDs☆44Updated 5 years ago
- Cordwood-style blinky ring, powered by an ATtiny85 and a pair of size 10 Zn-air hearing aide batteries.☆38Updated 6 years ago
- Official repository for my RGB LED Ring!☆19Updated 2 years ago
- j4cDAC laser show controller☆63Updated last year
- Simple Skinnable, 3D Printed SplitFlap Display Module, permit to display large numbers, connecting the modules to each other☆46Updated 3 years ago
- Independently configure and display to various LED devices in one sketch with parallel DMA-driven LED output.☆31Updated 2 months ago
- ☆34Updated 4 years ago
- ☆66Updated 5 years ago
- A dynamic, generic & N-pixel ArtNet via WIFI to Neopixel (WS2812, SK6812) driver☆18Updated 5 years ago
- ☆28Updated 6 years ago
- Laser show controller for Raspberry Pi☆54Updated 8 years ago
- ☆109Updated 6 months ago
- ACTIVE is a sculpture of light built with Evan Miller. To entice the imagination and wonder about objective vs subjective reality.☆13Updated 9 years ago
- Sixteen Segment Display in the Klais range.☆55Updated 4 years ago
- Rotary encoder board + I2C driven 16xLED ring☆12Updated 9 years ago
- Sending pixels from TouchDesigner to Fadecandy☆17Updated 9 years ago
- ESP8266 based WIFI pixel drivers. A design for both GECE (GE Color Effects) and standard WS2811 pixels.☆15Updated 9 years ago
- A 16bit 6ch DAC for ILDA up to 400kpps☆44Updated 3 years ago
- An Arduino ESP32/ESP8266 library for extremely rapid IoT web page UI creation☆27Updated 4 months ago
- A system to control a stepper motor over DMX protocol.☆13Updated 5 years ago
- Logic Analyzer plugin for WS2812 addressable LEDs.☆24Updated 8 years ago
- Spore WiFi LED module. Firmware and Hardware.☆24Updated 2 years ago