Alternatives and similar repositories for jffs2extract

Users that are interested in jffs2extract are comparing it to the libraries listed below

• jwise / ndfslave
  Tools to pull data off of a NAND flash chip using a Digilent Nexys-2 board.
  ☆31Updated 11 years ago
• vdudouyt / usbsniff
  USB reverse engineering utils (capture / replay / e.t.c.)
  ☆51Updated 2 years ago
• npitre / cramfs-tools
  Tools to create a cramfs filesystem image
  ☆39Updated 5 months ago
• bmaia / lzma-unpacker
  Extract LZMA sections from cable modem firmware images
  ☆20Updated 11 years ago
• project-magpie / jffs2dump
  ☆17Updated 10 years ago
• fesh0r / romdump
  EFI bios rom dumping tools
  ☆20Updated 11 years ago
• jevinskie / litespih4x
  SPI flash MITM and emulation (QSPI is a WIP)
  ☆20Updated 3 years ago
• bvernoux / micropython
  The Micro Python project (adding HydraBus Port)
  ☆8Updated 3 years ago
• stdw / bcm3383-reverse-engineering
  ☆13Updated 4 years ago
• pfalcon / ida-xtensa2
  IDAPython plugin for Tensilica Xtensa (as seen in ESP8266), version 2
  ☆35Updated 8 years ago
• NikolajSchlej / RushSPI
  Open Hardware SPI programmer based on FTDI FT232H
  ☆23Updated 12 years ago
• dchokola / reed-solomon
  Reed-Solomon Codec
  ☆11Updated 6 years ago
• matlo / bb_usb_sniffer
  Tools to set up a usb sniffer on a beagleboard xM
  ☆59Updated 9 years ago
• ryancor / WCH340_ROM-Extractor
  Extracting bits from Microscope images of ROM Constants, and disassembling them into readable 8051 assembly code
  ☆22Updated 4 years ago
• zoobab / tjtag-arduino
  Use the arduino as a JTAG adaptor with Tjtag
  ☆47Updated 4 years ago
• saleae / JtagAnalyzer
  Outdated. See https://github.com/saleae/jtag-analyzer for the official Saleae JTAG Analyzer
  ☆12Updated 7 years ago
• sutajiokousagi / fernvale-nuttx
  NuttX port to Fernvale platform
  ☆26Updated 8 years ago
• vsergeev / vavrdisasm
  vAVRdisasm is an 8-bit Atmel AVR disassembler.
  ☆76Updated 6 years ago
• ddcc / drive_firmware
  Deobfuscation utilities for HDD/SSD firmware images
  ☆76Updated 6 years ago
• rdiez / DebugDue
  Emulates a Bus Pirate OpenOCD JTAG adapter with an Arduino Due
  ☆49Updated this week
• Vogtinator / usbredir2phys
  Turns virtual usbredir connections into physical ones
  ☆14Updated 5 years ago
• molejar / pyUBoot
  Python module for manipulating with U-Boot images and environment variables
  ☆18Updated last year
• timvideos / HDMI2USB-fx2-firmware
  HDMI2USB firmware for the Cypress FX2 found on the Digilent Atlys and Numato Opsis boards.
  ☆24Updated 5 years ago
• avivgr / teensy_debugdev
  USB 2.0 Debug cable using teensy
  ☆17Updated 11 years ago
• marsohod4you / MBFTDI-SVF-Player
  MBFTDI is application which allows to play SVF (Serial Vector Format) files and so execute JTAG commands on FPGA/CPLD chip. Special MBFDT…
  ☆37Updated 3 years ago
• devttys0 / wrt120n
  ☆57Updated 11 years ago
• mtek-hack-hack / mtktest
  Automatically exported from code.google.com/p/mtktest
  ☆18Updated 10 years ago
• s-e-p / uboot-env
  Utility for modifying saved U-Boot environment variables on devices or images
  ☆11Updated 3 years ago
• airbus-seclab / sdmmc-analyzer
  SD/MMC Analyzer for Saleae Logic
  ☆37Updated last year
• devttys0 / rtlsdr-tcxo
  ☆10Updated 9 years ago