Alternatives and similar repositories for plotadapter

Users that are interested in plotadapter are comparing it to the libraries listed below

• OliWright / PicoVectorscope
  ☆33Updated last year
• KarstenHervoeHansen / PTV
  Design Documentation of Philips/PTV product
  ☆56Updated last year
• Veyniac / Pico-Audio-Interface
  A cheap 2-channel USB audio interface based on a Pi Pico board
  ☆29Updated 7 months ago
• AndersBNielsen / Universal-Serial-Adapter
  Hackable USB-C UART RS232 Adapter
  ☆35Updated last year
• english1234 / vstcm
  The v.st Colour Mod - a colour vector generator based on the original v.st
  ☆63Updated 6 months ago
• Jean-MarcHarvengt / T-COMPUTER
  Teensy 4.1 based micro computer
  ☆40Updated 2 years ago
• lucysrausch / sony-scopeman
  Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector disp…
  ☆67Updated 5 years ago
• settinger / microusb_socket_panel
  A 0.60-mm thick PCB makes a perfect micro-USB port! Inspired by: https://www.kickstarter.com/projects/252587878/the-worlds-smallest-tiny-…
  ☆20Updated 5 years ago
• simonboak / Paper-Tape-Punch
  My DIY paper tape punch project
  ☆31Updated 2 months ago
• c0pperdragon / HotPlate
  ☆34Updated last year
• slipperyseal / monty
  Commodore 64 Stereo 6581 SID Synth
  ☆51Updated 2 years ago
• nickbild / gi-pi
  Control the classic General Instrument SP0256-AL2 speech chip and AY-3-8910 sound generator with a Raspberry Pi and this Python library.
  ☆10Updated 4 years ago
• mengstr / Rom2k40
  EPROM emulator based on RP2040
  ☆11Updated 3 years ago
• kokotisp / 6581-SID-teensy
  6581 SID Emulator using teensy 3.6
  ☆37Updated 6 years ago
• cybernesto / sid-arduino-lib
  MOS6581 SID Emulator Arduino Library
  ☆45Updated 2 years ago
• tanmoydutta / thermalprintercontroller
  ☆22Updated 7 months ago
• caiannello / WAV2VGM
  Uses spectral analysis to convert sounds/music from WAV format into VGM format suitable for an OPL3 synthesizer.
  ☆29Updated last year
• softegg / supercon-2023-badge-enclosure
  This is an enclosure for the Hackaday Supercon 2023 Vectorscope badge
  ☆21Updated last year
• fdufnews / SMART-Response-XE-schematics
  Schematics of the SMART Response XE terminal
  ☆51Updated 3 years ago
• tomverbeure / fake_parallel_printer
  Capture traffic on parallel printer port to USB
  ☆89Updated last year
• ThomasRinsma / kb1
  A fully custom DIY mechanical keyboard
  ☆26Updated last year
• atomic14 / ch32v003-audio
  ☆67Updated 2 months ago
• nataliethenerd / KicadConductivePads
  Kicad Conductive Pad footprints
  ☆13Updated 3 years ago
• uXeBoy / VGA1306
  VGA1306 (VGA-out for DIY Arduboys implemented on an FPGA!)
  ☆27Updated 4 years ago
• chmod775 / SMARTResponseTerminal
  Firmare to turn a SMART Response XE into a serial terminal. https://hackaday.io/project/180910-smart-response-xe-linux
  ☆35Updated 3 years ago
• profdc9 / HIDPanel
  A customizable HID USB device with buttons, encoders, sliders, potentiometers, etc.
  ☆44Updated 2 years ago
• ukmaker / VDPtoTFT
  Converts the output from an old TMS9928A Video Display Processor to drive a small TFT panel using either an SPI or a parallel interface. …
  ☆27Updated 3 years ago
• osresearch / pixel-wrangler
  HDMI to whatever adapter
  ☆119Updated 2 years ago
• hpwit / SID6581
  Control a SID Chip using esp32
  ☆57Updated 2 years ago
• schlae / crt-driver
  ☆74Updated 10 years ago