rgerganov / ggwave-fm
Transmit ggwave encoded messages with an SDR
☆22Updated 3 years ago
Alternatives and similar repositories for ggwave-fm
Users that are interested in ggwave-fm are comparing it to the libraries listed below
Sorting:
- Detect jamming on ISM bands using an RTLSDR dongle and a Raspberry Pi or laptop PC☆35Updated 7 years ago
- Spectrum analyzer on your terminal/ssh console with ASCII art ~ SoapySDR☆38Updated 2 years ago
- rtl_fl2k_433 - a generic data receiver and transmitter☆19Updated 5 years ago
- A featured-limited version the SDR4.space embedded software, originally designed for embedded GPU systems.☆25Updated 3 years ago
- APRS tracker with an SDR☆38Updated 3 years ago
- gr-osmosdr fork with hackrf_tcp source support☆35Updated 10 years ago
- A reimplementation of hackrf_sweep as a library☆44Updated 6 months ago
- CTCSS decoder with gnuradio☆14Updated 11 years ago
- RF signal monitor☆47Updated 7 years ago
- Control utility for the Othernet moRFeus RF signal generator/mixer.☆17Updated 6 years ago
- Raspberry Pi WSPR transmitter using NTP based frequency calibration☆28Updated 2 years ago
- ☆30Updated 5 years ago
- Guide to configure rasberry pi, hackrf one and soapy sdr to control the device remotely.☆19Updated 2 years ago
- A scrolling spectrum plot for RTLSDR.☆70Updated 12 years ago
- Thrifty is proof-of-concept SDR software for TDOA positioning using inexpensive SDR hardware such as the RTL-SDR.☆64Updated 6 years ago
- tx_sdr tool for transmitting data to SDRs using SoapySDR☆47Updated last year
- Small signal processing utility library☆83Updated 3 weeks ago
- Use iPad to see plane: HACKRF firmware to relay 1090MHz ADS-B to BTLE by single board over the air.☆44Updated 6 years ago
- An Open Source software for connect, review and analyze packages of LoRa®, we recommend using with catWAN USB Stick☆22Updated 2 years ago
- Command line interface client to RFQuack dongles☆10Updated 2 years ago
- ☆26Updated 9 years ago
- lna for use with the ez-cap digital TV USB stick☆48Updated 9 years ago
- A browser based SDR console.☆24Updated last year
- A GnuRadio Companion flow graph for transmitting (via HackRF) and receiving (via RTLSDR) D-Star audio from OpenDV's soundcard adapter.☆9Updated 9 years ago
- POCSAG SDR I/Q files creator☆12Updated 7 years ago
- Software used in Electrosense nodes☆14Updated 2 years ago
- A collection of useful tools for use with the LimeSDR family of boards☆31Updated 3 years ago
- Calibrate multiple rtl-sdr dongles concurrently and make them work together on GSM☆44Updated 10 years ago
- kalibrate-bladeRF☆51Updated 3 years ago
- frequency scan and jamming☆27Updated 8 years ago