radhoo / uradmonitor_kit1Links
A hackable open source sensor IoT board with network interface. A DIY Geiger counter KIT to contribute readings to the uRADMonitor network.
☆81Updated last year
Alternatives and similar repositories for uradmonitor_kit1
Users that are interested in uradmonitor_kit1 are comparing it to the libraries listed below
Sorting:
- The PiGI is built as a ready-to-go drop-in module for the Raspberry Pi to transform it into a versatile geiger counter to measure/monitor…☆55Updated 5 years ago
- An open source software suite to control the ADF4351 board☆67Updated 3 years ago
- Schematics and code for the Re:load Pro☆100Updated 8 years ago
- Open-Source firmware for the ZPB30A1 electronic load (WIP)☆50Updated 7 years ago
- Simple Scalar Network Analyzer Arduino code and Python UI☆22Updated 9 years ago
- Portable radiation detector based on an ionization chamber☆62Updated last year
- K6BEZ Antenna Analyzer Build Project☆35Updated 8 years ago
- Scans LoRa channels displaying any monitored packets on the TFT display☆91Updated 7 years ago
- Arduino library for interfacing with Analog Devices ADF4350 (and similar) PLL chips.☆22Updated 4 years ago
- Spectrum Analyzer for the Rigol DS1000 series oscilloscopes☆135Updated 3 years ago
- Faraday hardware design files☆41Updated 8 years ago
- ☆16Updated 8 years ago
- A Multimeter Application. For nightly builds goto: https://gitlab.com/Sepps/app-121gw☆33Updated 7 years ago
- Improved antuino software☆45Updated 5 years ago
- Si5351 lib for STM32☆58Updated 3 years ago
- This is a no frills DIY Analyzer intended for frequencies ranging from 1.6 to 30 Mhz☆139Updated 5 years ago
- Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)☆23Updated 5 years ago
- Vector Network Analyzer based on the STM32F103C8T6 bluepill☆85Updated 4 years ago
- ☆55Updated last year
- Frontend Filter and LNA Design for the reception of Aircraft ADS-B signals. CC-BY-SA☆72Updated 11 years ago
- Open-Source firmware for chinese electronic load 60W/110W ZPB30A1☆16Updated 3 years ago
- Files for my Lars GPSDO project☆37Updated last year
- ☆21Updated 2 years ago
- attempt to restore buildability of Wildcat's DSO203 oscilloscope firmware + bugfixes☆28Updated 6 years ago
- Software defined radio using Teensy 3.1, Teensy Audio shield and Softrock☆91Updated 8 years ago
- Open Source Reflow Oven Controller.☆19Updated 3 years ago
- VNA software with an Arduino☆37Updated 7 years ago
- A cheap open source CW keyer (ATtiny*5)☆16Updated 7 years ago
- This is all of the code, datasheets and design files for my instructable☆37Updated 9 years ago
- VNA using audio input☆28Updated 4 years ago