pycubed / firmwareLinks
low-level code implementing CircuitPython (port of Micropython)
☆18Updated 4 years ago
Alternatives and similar repositories for firmware
Users that are interested in firmware are comparing it to the libraries listed below
Sorting:
- Pycubed PC104 layout design files☆93Updated 4 years ago
- Default software files for PyCubed mainboard☆52Updated 2 years ago
- Design discussions, engineering justifications, and qualification data☆27Updated 4 years ago
- ☆34Updated 4 years ago
- Hardware design files for the Quetzal-1 mission.☆49Updated last year
- Flight software for the Quetzal-1 mission. This repository contains the flight-proven code of the satellite's Electrical Power System (EP…☆60Updated last year
- Ultra Sound Levitation board with two speakers and potentiometer☆20Updated 3 years ago
- ☆20Updated 3 years ago
- Yet Another TruePosition GPSDO☆15Updated 3 years ago
- Mechanical design information for Acorn, the precision farming rover from Twisted Fields☆47Updated 5 years ago
- Serial port emulation over CAN bus☆30Updated 3 years ago
- Telemetry and photos received from the Quetzal-1 mission.☆24Updated last year
- Horus Binary v2 HAB Tracker☆83Updated this week
- PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.☆78Updated last year
- Clock 742 is a clock made with a PCB diffuser☆16Updated 3 years ago
- Based on Radioberry designd by" https://github.com/pa3gsb/Radioberry-2.x"☆72Updated 2 years ago
- Microscope upgrade with xyz stage and 2K camera stream☆15Updated last year
- Experiments using the RPI Zero GPU for FFT (1D and 2D)☆36Updated 4 years ago
- Simple design for 16x2 OLED Character Display using the US2066 chip☆13Updated 2 years ago
- SatNOGS Rotator project☆78Updated 7 years ago
- Banana jack module☆16Updated last year
- GUI tool for controlling moRFeus☆25Updated 5 years ago
- A simple and low cost particle detector for teaching☆80Updated last year
- PicoBerry - small CM4 carrier board with full 40-pin GPIO header☆64Updated 3 years ago
- Designer tool for "Lenticular Objects: 3D Printed Objects with Lenticular Lens Surfaces That Can Change their Appearance Depending on the…☆15Updated last year
- The old code for our 36 channel rtl-sdr based coherent receiver☆116Updated last year
- LoRa HAB Repeater☆45Updated 6 years ago
- ☆20Updated 6 months ago
- All HF bands QRP CW/SSB transceiver☆69Updated 2 weeks ago
- ATtiny13A Resistive Soil Sensor for Duck Lovers☆10Updated 2 years ago