Alternatives and similar repositories for pk2cmd

Users that are interested in pk2cmd are comparing it to the libraries listed below

• ragges / tektools
  Tektronix TDS 5xx/6xx/7xx/8xx tools on Linux, ARM, and MacOS
  ☆32Updated 6 years ago
• fenlogic / IDE_trial
  Project to talk to IDE interface using Raspberry-Pi GPIO pins in SMI (Secondary Memory Interface bus) mode
  ☆63Updated 8 years ago
• sowbug / JTAGWhisperer
  Yes, your Arduino can replace an expensive JTAG cable!
  ☆158Updated 12 years ago
• tmbinc / rigol-uboot
  uboot for Rigol DS1xxxZ Oscilloscope
  ☆31Updated 8 years ago
• wschutzer / xsvfduino
  An Arduino as an XSVF player to program CPLD's and FPGA's
  ☆28Updated 4 years ago
• johnnydrazzi / USB-uC
  USB MSD Bootloader for PIC Microcontrollers
  ☆39Updated last year
• kgsws / uvc_scope
  LCD capture for Rigol DS1074 using UVC on Cypress FX3
  ☆16Updated 4 years ago
• atc1441 / chflasher
  ☆29Updated 5 years ago
• mrjimenez / JTAG
  JTAG library for Arduino
  ☆144Updated last year
• shuckc / urjtag
  urjtag from upstream on sourceforge http://sourceforge.net/projects/urjtag/
  ☆30Updated 2 years ago
• kprasadvnsi / CH559_Doc_English
  Documentation for CH559 Microcontroller.
  ☆32Updated 5 years ago
• JohnDMcMaster / open-tl866
  Open Programming Firmware for the TL866A Programmer.
  ☆135Updated 3 years ago
• tuxyme / metal-pi
  Raspberry PI bare metal
  ☆48Updated 12 years ago
• ChinaQMTECH / CYCLONE_IV_EP4CE15
  ☆27Updated 4 years ago
• LAtimes2 / TeensyLogicAnalyzer
  Logic Analyzer for the Teensy development boards (pjrc.com/teensy)
  ☆87Updated 5 years ago
• harrywalsh / pico-hw_and_pio-uart-gridge
  ☆32Updated 4 years ago
• azonenberg / voltage-divider-calculator
  Tool for selecting voltage divider components given constraints and a list of available resistors
  ☆35Updated 3 years ago
• mitxela / kiloboot
  1kB TFTP Ethernet bootloader for ATmega328P and ENC28J60
  ☆55Updated 8 years ago
• mattvenn / kicad
  ☆14Updated 5 years ago
• dougg3 / CH55x-USB-Blaster
  Fork of CH55x-USB-Blaster firmware that runs on cheap USB Blaster I got on Amazon
  ☆45Updated last year
• richardeoin / ftx-prog
  A Linux command-line alternative to the FTDI FTProg utility for FTDI's FT-X series
  ☆133Updated last year
• Galvant / gpibusb-documentation
  Documentation files for GPIBUSB
  ☆22Updated 11 years ago
• mithro / ixo-usb-jtag
  usb-jtag - Altera USB Blaster Emulation with a FX2
  ☆73Updated 3 months ago
• FPGA-Computer / STM32F030F4-VGA
  This is a bare metal VGA Text library + projects/examples for the STM32F030F4
  ☆66Updated 7 years ago
• Galvant / gpibusb-firmware
  PIC firmware for GPIBUSB
  ☆53Updated 11 years ago
• GMMan / st-link-hack
  An exploration into unsafely written code
  ☆78Updated 2 years ago
• michalin / CFCard-Arduino
  Arduino library that supports CF Cards and PATA drives
  ☆39Updated 5 years ago
• ChinaQMTECH / QMTECH_Cyclone10_10CL006_025
  Release Package for Intel Cyclone 10 FPGA
  ☆21Updated 2 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆37Updated 2 years ago
• matrix-io / xc3sprog
  xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …
  ☆133Updated last year