pecostm32 / Hantek_DSO2000
Schematics and datasheets for the Hantek DSO2000 series
☆45Updated 4 months ago
Alternatives and similar repositories for Hantek_DSO2000:
Users that are interested in Hantek_DSO2000 are comparing it to the libraries listed below
- ☆35Updated 3 years ago
- Linux for the Hantek DSO2000 series using Buildroot☆30Updated 3 years ago
- eMMC WFBGA153 to microSD card adapter PCB☆58Updated 9 months ago
- HP34401a DMM OLED display mod hardware☆25Updated 5 years ago
- USB-Blaster firmware that runs on cheap with CH552G chip☆16Updated last month
- low noise low cost stm32 usb-audio dac with optional level meter☆71Updated 2 months ago
- Fork of CH55x-USB-Blaster firmware that runs on cheap USB Blaster I got on Amazon☆30Updated 2 months ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- stm32 black pill usb sound card☆54Updated last year
- EMC near-field probe designs☆29Updated 4 years ago
- Use the ch32v003 as a usb pd controller☆38Updated 8 months ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆32Updated last year
- simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board☆33Updated 4 years ago
- WeAct LogicAnalyzerV1 : A logic analyzer based on Cypress CY7C68013A / Corebai CBM9002A☆91Updated last year
- This is the PICkitPlus device database repository. This is the device database used by PICkitPlus for the PICkit 2 and PICkit 3 program…☆52Updated last year
- This is a repository to hold files related to the VBA Curve Tracer project☆62Updated 4 months ago
- ☆21Updated 7 months ago
- A libusb based programming tool for 24Cxx serial EEPROMs using the WinChipHead CH341A IC☆40Updated 5 years ago
- BlackPill Core Board AT32F403ACGx(240Mhz,96kRAM/1024kROM)☆49Updated 2 years ago
- A HID driverless bootloader and flash tool companion for the STM32F1 line☆39Updated last week
- ☆94Updated 8 months ago
- Software JTAG probe running on stm32f103.☆24Updated 4 years ago
- USB Type-C Power Delivery Trigger and Monitoring Board☆81Updated last year
- 2.5kV Isolator for the USB Power Rail☆52Updated 2 years ago
- Footprints and template for making your own M.2 devices☆97Updated 2 years ago
- 2GHz single-ended active probe design☆121Updated 8 months ago
- An exploration into unsafely written code☆70Updated last year
- Improved multislope ADC☆22Updated 4 months ago
- 32-bit RISC-V MCU CH32X035 built-in USB PD PHY☆52Updated 3 months ago
- DIY RF Power Supply for Metcal handpiece☆91Updated 3 years ago