patience4711 / RPI-APS-inverters
a software for a raspberry pi zero to read the production of aps inverters yc600 and qs1
☆47Updated 2 months ago
Alternatives and similar repositories for RPI-APS-inverters:
Users that are interested in RPI-APS-inverters are comparing it to the libraries listed below
- Software for an esp8266 nodemcu to read data from APS inverters.☆136Updated 8 months ago
- Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…☆158Updated last year
- ☆33Updated last month
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆82Updated last week
- ESPHome component to read out DLMS smart meters via M-Bus☆113Updated 11 months ago
- Little Program for ESP82XX to get the Victron data to web and MQTT☆66Updated 2 months ago
- This Venus OS driver gets the data from MQTT and displays it as temperature sensor.☆16Updated last month
- Adding WiFi monitoring to US2000B and US2000C batteries.☆142Updated 2 years ago
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆56Updated 8 months ago
- ☆47Updated 2 weeks ago
- EspEpeverController mit Webseite, Der Esp8266 ist über ein Rs485 Modul mit dem Epever Solar Laderegler verbunden und kann diesen die verf…☆44Updated last year
- This Venus OS driver gets the data from MQTT and displays it as solar charger.☆20Updated last month
- ☆13Updated 5 months ago
- Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.☆23Updated 2 months ago
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆250Updated this week
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆52Updated 2 weeks ago
- Integrate Shelly 1PM into Victron Energies Venus OS as a pv inverter☆55Updated 8 months ago
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆50Updated 2 years ago
- This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.☆76Updated this week
- Esphome component for Deye 3 phase inverters for Home Assistant☆162Updated 3 months ago
- MQTT-dbus Bridge for Victron CerboGX (Venus) and Eastron SDM630 Power Meter☆27Updated last year
- Brings EVSE WB/DIN into your WiFi☆79Updated 2 years ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆154Updated 9 months ago
- Emulates Hörmann UAP1-HCP board using an ESP32 and a RS485 converter, and exposes garage door controls over web page and MQTT.☆95Updated 2 weeks ago
- Set power input to zero for soyosource gti inverters and MPPT charge controllers.☆27Updated this week
- Firmware battery safety controller (BSC)☆122Updated 2 weeks ago
- Use a esp32 to push VE.Direct ASCII messages to a MQTT server☆60Updated last year
- Growatt ShineWifi modbus with ESPHome code to run native in Home Assistant☆31Updated 9 months ago
- A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt☆131Updated 3 months ago
- ☆99Updated 6 months ago