oxplot / tjtag-pi
TJTAG JTAG flash programmer for WRT54G and related routers with Raspberry Pi support
☆83Updated 6 years ago
Related projects ⓘ
Alternatives and complementary repositories for tjtag-pi
- Broadcom CFE Bootloader☆39Updated last year
- zJTAG is an EJTAG Debrick Utility based on BrJTAG☆12Updated 8 years ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- U-Boot for Kirkwood Devices☆47Updated 3 years ago
- Dump NOR/Parallel FLASH memory chips using an Arduino or Raspberry Pi☆40Updated 7 years ago
- OpenWrt 15.05 port for the ZSUN WiFi SD Card Reader☆96Updated 7 years ago
- Diagnostics for Samsung SSD EVO 840☆47Updated 5 years ago
- When you are presented with pins that you suspect provide Serial but you do not have access to the documentation. Connect your Arduino …☆86Updated 5 years ago
- dump NAND FLASH memory chips☆47Updated 8 years ago
- Community driven firmware and hardware for Bus Pirate☆77Updated 9 months ago
- CFE backup tool.☆33Updated 2 years ago
- A command-line tool to control 433MHz OOK based devices☆41Updated 5 years ago
- The EEPROM software for the WCH CH341A originally written by asbokid☆45Updated 8 months ago
- Telephony driver for Broadcom 6358 running OpenWrt☆23Updated 4 years ago
- under construction☆93Updated 6 years ago
- Specialized boot loader with enhanced recovery capabilities for routers☆28Updated 4 years ago
- Reimplementation of serprog-duino based on the original flashrom serprog interfacing code (now libfrser).☆67Updated last year
- External buildroot tree for the eureka (Chromecast) dongle☆53Updated 7 years ago
- Teensy 3.1 doing serprog with LPC and SPI (and FWH...)☆11Updated 9 years ago
- Mirror of https://git.lede-project.org/?p=source.git Please send your PRs against this tree. They will be merged via staging trees and ap…☆16Updated 7 years ago
- Raspberry PI bare metal☆47Updated 10 years ago
- Upconverter 125MHz v1.3 - Passive Upconverter Hardware Design for SDR☆77Updated 9 years ago
- ATMega16U2 firmare - faster than arduino-usbserial☆22Updated 9 years ago
- Tool for Atheros ART partition☆44Updated 5 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆112Updated 10 years ago
- ☆39Updated 9 years ago
- Tutorial on how to connect an ssd1306 oled display to OpenWRT over a usb to i2c dongle (ch341)☆35Updated 8 years ago
- Some scripts to build and install the Realtek 8192cu driver via dkms, with concurrent mode enabled, allowing simultaneous AP and client m…☆38Updated 2 years ago
- CARL9170 Firmware Source Repository☆38Updated 5 months ago
- USB SMBus Interface☆145Updated 3 years ago