Alternatives and similar repositories for PCB-Pack-Supervisor

Users that are interested in PCB-Pack-Supervisor are comparing it to the libraries listed below

• offgridsystems / PCB-Clamp-Board
  This is repo for both Clamp Boards - 7.4V and 3.7V --- Make sure I only use the file with the 2 misaligned screw holes fixed...
  ☆10Updated 5 years ago
• offgridsystems / Documents
  Component data sheets, busbars and files needed to build no-weld BMS DKblock style battery packs. Here is a YouTube video, courtesy of …
  ☆43Updated last year
• owhite / brushless_gimbal_motor
  ☆22Updated 8 years ago
• openthermalcamera / HW-Firmware
  Firmware for the STM32F042F6 on the PCB
  ☆15Updated 6 years ago
• INTI-CMNB / PcbDraw
  Convert your KiCAD board into a nice looking 2D drawing suitable for pinout diagrams
  ☆13Updated last year
• kadeturn / Micro-Stepper
  ☆40Updated 4 years ago
• OpenPanzerProject / Scout-ESC
  Dual motor serial controller - ATmega 328 MCU with VNH5019 motor drivers
  ☆16Updated last year
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 3 years ago
• CapableRobot / SenseTemp
  An accurate and flexible four-channel temperature sensor designed for makers and engineers
  ☆14Updated 5 years ago
• easytarget / esp32-cjmcu-531-demo
  CJMCU-531 and ESP32 Web Demo interfacing to a VL53L1X IR time-of-flight sensor
  ☆55Updated 3 years ago
• azerimaker / BMS_3-5S
  3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.
  ☆21Updated 7 years ago
• Danny24 / smart_motor_driver
  This motor driver is designed to be interfaced from a host microcontroller by I2C and be able to control the motor with a PID autonomousl…
  ☆33Updated 3 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆58Updated 4 years ago
• ketszim97 / Mini_PD
  Miniature version of the USB_C_PD with the STUSB4500
  ☆27Updated 5 years ago
• ketszim97 / USB_PD_Sink
  USB Sink based around the STUSB4500
  ☆27Updated 5 years ago
• intelligent-agent / redeem
  Firmware for Replicape
  ☆37Updated 3 years ago
• shridattdudhat / Raspberry-Pi-Compute-Module-4-Eagle-Footprint
  New Raspberry Pi Compute Module 4 Eagle Library and 3D Models
  ☆39Updated 3 years ago
• Jana-Marie / transpOtterNG
  Next Generation of TranspOtter.
  ☆47Updated last year
• MitkoDyakov / GameBug
  Open Hardware gaming pads for breadboard.
  ☆11Updated 3 years ago
• indeterminatedesign / DynamicBalancer
  I came up with a design for a 3D printed Dynamic Spin Balancer using an ESP32, an MPU6050 and a hall sensor to help balance out my wheels…
  ☆16Updated 4 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• JRodrigoTech / xLIDAR
  Affordable and open-source LIDAR based on three VL53L0X ranging sensor.
  ☆68Updated 7 years ago
• microdev1 / microS2
  An esp32-s2 based development board in a tiny form factor 🚀
  ☆22Updated 4 years ago
• Makerfabs / ESP32_IMU_Module
  ☆42Updated 4 years ago
• robdobsn / RaftI2C
  ☆16Updated 3 weeks ago
• SasaKaranovic / ESP-IoT-Dimmer
  ESP8266 IoT three channel dimmer
  ☆40Updated 4 years ago
• ceech / BQ76920-BMS
  ☆39Updated 6 years ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 5 years ago
• beast-devices / ant2-usb-c-lipo-charger
  Tiniest USB-C LiPo charger
  ☆36Updated 3 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆56Updated 5 years ago