Alternatives and similar repositories for IDE

Users that are interested in IDE are comparing it to the libraries listed below

• nucleron / RTE
  ☆57Updated 6 years ago
• ciaa / IDE4PLC
  A libre Programming Software for PLC comply with IEC 61131-3
  ☆52Updated 8 years ago
• nwertzberger / OpenPLC
  OpenPLC is an open source PLC Hardware board. Think Arduino, but change the language used, up the voltage levels, and add a built-in Eth…
  ☆79Updated 7 years ago
• andreili / STM32-PLC
  The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
  ☆63Updated 8 years ago
• fredericdepuydt / profibus-dp-software-stack
  PROFIBUS DP Software Stack
  ☆40Updated 6 years ago
• nucleron / YAPLC
  ☆58Updated 6 years ago
• thiagoralves / OpenPLC-Neo
  A cheap, reliable, expandable and, of course, open source device that works with OpenPLC software
  ☆22Updated 7 years ago
• OpenAutomationTechnologies / openCONFIGURATOR_library
  openCONFIGURATOR 2.X core library
  ☆11Updated 7 years ago
• kgrze / HMI_Library
  Human Machine Interface (HMI) suitable for embedded system
  ☆11Updated 12 years ago
• dccharacter / STM32_Servo_Controller
  STM32-based servo/CNC/3D-printer controller
  ☆44Updated 13 years ago
• the-fenrir / Fuzzy-PID
  STM Code implementing Fuzzy Logic for PID to drive motor.
  ☆24Updated 7 years ago
• zjm1060 / stm32h7_flashloader
  QSPI flashloader(25q128)
  ☆20Updated 3 years ago
• nucleron / beremiz
  ☆67Updated 4 years ago
• WeSpeakEnglish / STM32PLC
  The PLC based on STM32F746
  ☆22Updated 8 months ago
• yuqlid / EtherCAT_board
  EtherCAT slave board uisng LAN9252
  ☆16Updated 8 years ago
• DieBieEngineering / DieBieCANToUSB
  CAN to USB converter based on the cantact
  ☆14Updated 7 years ago
• kernelbee / MitsubishiFX3
  Framework for PLC project files parser/decoder/encoder
  ☆14Updated 12 years ago
• ethercat-diy / stm32f4_ethercat
  ☆32Updated 9 years ago
• szp7788196 / NSLC
  新款单灯控制器，支持0~10V、数字、PWM、DALI调光
  ☆15Updated 7 years ago
• myildirim10 / CANopenNode-Easy-Port
  This project was made to more easily "port" the CANopenNode open source library. Contains sample projects made with STM32, ESP32, TI (TMS…
  ☆13Updated 2 years ago
• DanielMartensson / OpenSourceLogger-Qt
  Open Source Data Acquisition System
  ☆23Updated 3 years ago
• DieBieEngineering / DieBieSlave-Firmware-Nunchuck
  ☆41Updated 8 years ago
• rtlabs-com / c-open
  CANopen stack for embedded devices
  ☆87Updated 3 months ago
• SimeonSimeonovIvanov / DC-Servo
  Analog speed control of Brushed DC Motor
  ☆27Updated 2 years ago
• emersbergerl / opcua2powerlink
  Open source implementation of gateway for OPC UA (OPC Unified Architecture) to the real-time Industrial Fieldbus POWERLINK
  ☆24Updated 7 years ago
• tanyigergo / DP_Slave_HW
  Hardware design of the Profibus DP slave device
  ☆12Updated 7 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆28Updated 7 years ago
• linghu0060 / SL-DPT100
  ProfiBus-DP to TCP/IP Ethernet
  ☆25Updated 8 years ago
• ulrikhagstrom / datalinkengineeringcanopen
  CANopen SDK (API) for Windows developers. Supported adapters: Kvaser, Ixxat, CANUSB, CAN232, Peak PCAN, Copley Controls, USBTIN and more.
  ☆38Updated 2 years ago
• UniSwarm / UDTStudio
  UniSwarm Tools for UDT interface and CANOpen in Qt5/6
  ☆31Updated last week