Alternatives and similar repositories for EMV-Reader

Users that are interested in EMV-Reader are comparing it to the libraries listed below

• adafruit / Pi_Physical_Dashboard
  Python code to drive a physical dashboard built with a Raspberry Pi, LED backpacks, and automotive gauges. See the full guide at: https:…
  ☆13Updated 10 years ago
• collin80 / Open-Vehicle-Monitoring-System
  We are a group of enthusiasts who want an interface to be able to talk to our cars remotely, perhaps add on-car displays (such as heads-u…
  ☆11Updated 12 years ago
• openxc / openlpc-USB_Bootloader
  LPC1759 USB bootloader based on a Mass Storage Device
  ☆13Updated 9 years ago
• sangeeths / OpenADR
  Work-in-progress: A Python implementation of OpenADR as per the guidelines of http://www.openadr.org/
  ☆18Updated 12 years ago
• djdt / spcal
  spICP-MS calculator.
  ☆11Updated this week
• myriadrf / clock-tamer
  Compact low-cost configurable clock generator with GPS sync option
  ☆12Updated 10 years ago
• philippmeisberger / pyrfid
  Python 2 and 3 library for 125kHz EM4100 RFID readers
  ☆13Updated 6 years ago
• joeljacobs / DSUButtons
  Code and Info for Re-enabling buttons disabled by disconnecting DSU for OpenPilot
  ☆11Updated 6 years ago
• rena2019 / ArduinoM24SR
  Arduino library for ST M24SR NFC dynamic tag
  ☆10Updated 11 years ago
• ContextualElectronics / embedded-dev-env
  A Vagrant configuration that sets up the CE Embedded Development Environment. It is based off of the stm32-eclipse-linux-trusty64 project…
  ☆10Updated 9 years ago
• sigio / dsmr22-landis-gyr-interface
  Arduino (ino) sketch to read / translate DSMR22 reports from Landis Gyr E350 (inverted serial protocol)
  ☆11Updated 7 years ago
• nitrousnrg / ECUmanager
  Multiplatform Graphical User Interface for engine management systems
  ☆19Updated 15 years ago
• latonita / jeep-canbus
  Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
  ☆29Updated 3 years ago
• festlv / canbus_logger
  CANBus logger using Arduino + MCP2515 with GUI in Python
  ☆24Updated 13 years ago
• i-Cell-Mobilsoft-Open-Source / roaster
  Developer and Integration test framework based on coff:ee
  ☆13Updated 3 months ago
• JoeyZhu / Thermometer
  a thermometer based on cc2541 BLE with tmp112 as temperature sensor.
  ☆14Updated 11 years ago
• TrystanLea / emonview
  An open source python, flask, socketio, js web application for monitoring and control
  ☆17Updated 10 years ago
• watterott / CANdiy-Shield
  CAN-Bus Shield for Arduino based on Microchip MCP2515 or MCP2517FD CAN Controller
  ☆27Updated 6 years ago
• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• EnerNOC / oadr2-vtn-new
  Re-write of the open source VTN for OpenADR 2.0
  ☆24Updated 10 years ago
• mweir / Embedded-PN532
  This is an open source NFC stack for the arduino microcontroller that allow peer-to-peer communication between the embedded platform and …
  ☆20Updated 7 years ago
• jerkey / minievse
  circuit for a minimal EVSE for charging an electric vehicle with the J1772 standard
  ☆11Updated 9 years ago
• benogle / obd0vtec_dev
  Honda OBD0 VTEC ECU development materials.
  ☆47Updated 15 years ago
• xiongyihui / PN532
  NFC library for Arduino
  ☆21Updated 4 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆38Updated 10 years ago
• fazjaxton / CAN
  This library is intended for use with the FazCAN shield for Arduino and the Arduino 1.0 (or later) development environment.
  ☆15Updated 10 years ago
• calvincestari / ecuExplorer
  An open-source application for the Subaru ECU.
  ☆36Updated 7 years ago
• HubertD / socketcan-mqtt-bridge
  python script to bridge between a mqtt server (e.g. mosquitto) and a socketcan device
  ☆13Updated 9 years ago
• TKJElectronics / ArduinoRFIDDoorLock
  This is the code for our Arduino RFID Door Lock
  ☆15Updated 11 years ago
• GENIVI / genivi_swm
  The Software Management System (SWM) drives software install, upgrade, and removal use cases.
  ☆12Updated 8 years ago