nbstrong / JPL_10_Rules_for_Safety_Critical_Code_ExplanationLinks
Explanation with code exambles for NASA Jet Propulsion Lab's "The Power of 10: Rules for Developing Safety-Critical Code"
☆14Updated 2 years ago
Alternatives and similar repositories for JPL_10_Rules_for_Safety_Critical_Code_Explanation
Users that are interested in JPL_10_Rules_for_Safety_Critical_Code_Explanation are comparing it to the libraries listed below
Sorting:
- Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5☆38Updated 2 years ago
- USB-C powered LED fixture that fits on top of a microscope objective☆14Updated last year
- ☆16Updated 9 months ago
- Ultimate Continuity tester☆30Updated 5 years ago
- ☆32Updated 3 years ago
- Ultra Sound Levitation board with two speakers and potentiometer☆21Updated 3 years ago
- Multi Channel Configurable PID regulator on M5Stack Core☆48Updated last year
- Serial port emulation over CAN bus☆30Updated 3 years ago
- Solver32 is a 32-bit application for the LiteVNA as well as the V2Plus4. It was developed using National Instruments LabView 2011.☆15Updated 2 years ago
- USB controlled nRF24L01+ 2.4GHz Transceiver☆45Updated 2 months ago
- ☆24Updated last year
- quichip Add Rolling Code Protection☆16Updated last year
- Simple design for 16x2 OLED Character Display using the US2066 chip☆13Updated 2 years ago
- Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython☆34Updated last year
- Semi-automatic passive printable/castable feeder for LitePlacer☆59Updated 5 years ago
- Simple RPM-Meter☆57Updated 2 years ago
- ESP8266 Monitor Mode data logging examples with the ESPProLib☆38Updated 4 years ago
- repo for the Bee Data Logger☆69Updated 9 months ago
- LoRa messenger. Broadcast text-chatting communication device.☆29Updated 4 months ago
- Based on Radioberry designd by" https://github.com/pa3gsb/Radioberry-2.x"☆72Updated 2 years ago
- Open Source LC-Meter. All documentation included.☆85Updated 3 years ago
- Li-Ion battery charger, based on BQ24060 IC☆45Updated 2 years ago
- Describes and end-to-end process of milling PCBs with cheap 3018 machines. Provides some helpful utilities written in Python.☆67Updated 2 years ago
- A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico☆59Updated 11 months ago
- introduction-to-freecad☆21Updated last year
- A microcontroller board that can accommodate a range of different colour TFT displays.☆18Updated 3 years ago
- a custom board to monitor custom battery packs☆16Updated last year
- ☆34Updated 2 years ago
- Multi-sensor intelligent environmental Monitor☆17Updated last year
- An ESP32 project using two linear stepper motors and a burning laser diode☆60Updated 3 years ago